Have a customer with 3 analog lines coming into their office. 2811 router running CME 4 with IOS Version c2800nm-advipservicesk9-mz.124-9.T.bin<br><br>Have the following voice port and dial-peers set up:<br><br><br clear="all">
voice-port 0/0/0<br> connection plar opx 7177<br> caller-id enable<br>!<br>voice-port 0/0/1<br> connection plar opx 7177<br> caller-id enable<br>!<br>voice-port 0/0/2<br> connection plar opx 7177<br> caller-id enable<br>!
<br>dial-peer voice 1 pots<br> description ** FXO pots dial-peer **<br> destination-pattern 9911<br> port 0/0/0<br> forward-digits 3<br>!<br>dial-peer voice 2 pots<br> description ** FXO pots dial-peer **<br> destination-pattern 9T
<br> port 0/0/0<br>!<br>dial-peer voice 3 pots<br> description ** FXO pots dial-peer **<br> preference 1<br> destination-pattern 9911<br> port 0/0/1<br> forward-digits 3<br>!<br>dial-peer voice 4 pots<br> description ** FXO pots dial-peer **
<br> preference 1<br> destination-pattern 9T<br> port 0/0/1<br>!<br>dial-peer voice 5 pots<br> description ** FXO pots dial-peer **<br> preference 2<br> destination-pattern 9911<br> port 0/0/2<br> forward-digits 3<br>!<br>
dial-peer voice 6 pots<br> description ** FXO pots dial-peer **<br> preference 2<br> destination-pattern 9T<br> port 0/0/2<br><br>7177 is pilot point for a hunt group and here is that config<br><br>ephone-hunt 1 sequential
<br> pilot 7177<br> list 5001, 5093, 5094, 5002, 5003<br> final 6001<br> max-timeout 40<br> timeout 15, 10, 10, 7, 7<br> statistics collect<br><br>The problem lies in that when ever we get two calls and third call is made inbound or tried outbound the calling party gets a busy signal.
<br><br>I have physically called all the numbers individually and they all work therefore ruling out a line issue. All the FXO ports look good.<br><br>Any help would be greatly appreciated.<br><br><br><br><br><br><br><br>
<br><br><br><br>-- <br>Have a great day!!!!!!!!!!<br>zephy316_gmail.com<br><br>Replace the _ with an @ symbol