<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2963" name=GENERATOR>
<STYLE>@font-face {
font-family: Tahoma;
}
@font-face {
font-family: Verdana;
}
@page Section1 {size: 595.3pt 841.9pt; margin: 1.0in 1.25in 1.0in 1.25in; }
P.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: Tahoma
}
LI.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: Tahoma
}
DIV.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: Tahoma
}
A:link {
COLOR: blue; TEXT-DECORATION: underline
}
SPAN.MsoHyperlink {
COLOR: blue; TEXT-DECORATION: underline
}
A:visited {
COLOR: purple; TEXT-DECORATION: underline
}
SPAN.MsoHyperlinkFollowed {
COLOR: purple; TEXT-DECORATION: underline
}
P {
FONT-SIZE: 12pt; MARGIN-LEFT: 0in; MARGIN-RIGHT: 0in; FONT-FAMILY: "Times New Roman"
}
SPAN.emailstyle17 {
COLOR: windowtext; FONT-FAMILY: Arial
}
SPAN.EmailStyle18 {
COLOR: navy; FONT-FAMILY: Arial
}
SPAN.EmailStyle21 {
COLOR: navy; FONT-FAMILY: Arial
}
DIV.Section1 {
page: Section1
}
</STYLE>
</HEAD>
<BODY lang=EN-GB vLink=purple link=blue>
<DIV dir=ltr align=left><FONT face=Tahoma color=#0000ff size=2><SPAN
class=955061520-25082006>The below configuration was probably derived from using
the new configuration macros. "auto qos voip phone" and "...port host",
probably generated the configuration. I can't remember the syntax for the
2nd command.</SPAN></FONT></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Nick
Kassel<BR><B>Sent:</B> Friday, August 25, 2006 6:05 AM<BR><B>To:</B> Linsemier,
Matthew; cisco-voip@puck.nether.net<BR><B>Subject:</B> Re: [cisco-voip] Voice
Vlan Configurations<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV class=Section1>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Matthew</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Thanks for replying, I
am interested in your port-security configurations on your example, do your
ports get mac-addresses by using the switchport port-security mac-address sticky
command, could you possibly give me an example on the other commands
used.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Regards</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Nick
</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN lang=EN-US
style="FONT-SIZE: 12pt; FONT-FAMILY: 'Times New Roman'">
<HR tabIndex=-1 align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<P class=MsoNormal><B><FONT face=Tahoma size=2><SPAN lang=EN-US
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt">From:</SPAN></FONT></B><FONT
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt"> Linsemier, Matthew
[mailto:MLinsemier@apcapital.com] <BR><B><SPAN
style="FONT-WEIGHT: bold">Sent:</SPAN></B> Thursday, August 24, 2006 5:08
PM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B> Nick Kassel;
cisco-voip@puck.nether.net<BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> RE: [cisco-voip] Voice Vlan
Configurations</SPAN></FONT></P></DIV>
<P class=MsoNormal><FONT face=Tahoma size=3><SPAN
style="FONT-SIZE: 12pt"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Nick,</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">This is a really good
question to ask since there are so many different ways to configure QoS.
When we initially deployed QoS 4 years ago we used a combination of Cisco QPM
and a collection of configurations pulled from documents, Cisco Press books, and
industry peers. As of lately, we have been using the AutoQOS feature in
all of our 3550 switches and have had great luck.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Here is an excerpt of
how our voice ports are configured on our 3550.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">interface
FastEthernet0/1</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> switchport access
vlan 3</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> switchport mode
access</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> switchport voice
vlan 203</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> switchport
port-security maximum 3</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> switchport
port-security</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> switchport
port-security aging time 2</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> switchport
port-security violation restrict</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> switchport
port-security aging type inactivity</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> no logging event
link-status</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> mls qos trust
device cisco-phone</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> mls qos trust
cos</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> auto qos voip
cisco-phone </SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue
bandwidth 10 20 70 1</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue
min-reserve 1 5</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue
min-reserve 2 6</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue
min-reserve 3 7</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue
min-reserve 4 8</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue cos-map
1 0 1</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue cos-map
2 2 4</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue cos-map
3 3 6 7</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> wrr-queue cos-map
4 5</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> priority-queue
out</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> spanning-tree
portfast</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"> spanning-tree
bpduguard enable</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">For your data ports if
you remove your AutoQoS commands and remove your voice VLAN, it will default to
access mode. Note that if you have a phone plugged into this and the data
VLAN can see the CallManagers, the phone will still register. You can also
issue a “Show Parser Macro” to see some of the pre-defined macros that Cisco has
built by default for different port types such as desktop, phone, desktop +
phone, switch, router, etc.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">I am anxious to hear
some of the rest of the lists input on there methods and overall on AutoQoS in
an all Cisco environment.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Thanks,</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Matt</SPAN></FONT></P>
<DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN lang=EN-US
style="FONT-SIZE: 12pt; FONT-FAMILY: 'Times New Roman'">
<HR tabIndex=-1 align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<P class=MsoNormal><B><FONT face=Tahoma size=2><SPAN lang=EN-US
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt">From:</SPAN></FONT></B><FONT
size=2><SPAN lang=EN-US style="FONT-SIZE: 10pt">
cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net]
<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Nick
Kassel<BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Thursday, August
24, 2006 11:25 AM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B>
cisco-voip@puck.nether.net<BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> [cisco-voip] Voice Vlan
Configurations</SPAN></FONT></P></DIV>
<P class=MsoNormal><FONT face=Tahoma size=3><SPAN lang=EN-US
style="FONT-SIZE: 12pt"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">There seems to be so many different
ways to configure switch ports for voice and data that I am not sure are
configurations are correct.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">This is the configs we have been
using for our branch offices on 3560 switches, we have vlan 1 as our data vlan
and vlan 2 as the voice vlan.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Port 24 is the trunk port to the
router which has the WAN and voice configurations.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Also what configurations should I
use on ports that are just for data?</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Voice</SPAN></FONT></B><B><FONT
face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">
Port</SPAN></FONT></B></P>
<P class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT></B> </P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">interface
FastEthernet0/X</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">switchport voice vlan
2</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> srr-queue bandwidth share 10
10 60 20</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> srr-queue bandwidth
shape 10 0 0 0</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> mls qos trust device
cisco-phone</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> mls qos trust
cos</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> auto qos voip
cisco-phone</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> no mdix auto</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> spanning-tree
portfast</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><B><FONT face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">Router</SPAN></FONT></B><B><FONT
face=Arial size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Arial">
Port</SPAN></FONT></B></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> </P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">interface
FastEthernet0/24</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> description Router Trunk
Port</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> switchport access vlan
2</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> switchport trunk encapsulation
dot1q</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> switchport mode
trunk</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> srr-queue bandwidth share 10
10 60 20</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> srr-queue bandwidth
shape 10 0 0 0</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> mls qos trust
cos</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> auto qos voip
trust</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P>
<P class=MsoNormal style="MARGIN-BOTTOM: 12pt"><FONT face="Times New Roman"
size=3><SPAN
style="FONT-SIZE: 12pt; FONT-FAMILY: 'Times New Roman'"></SPAN></FONT> </P>
<TABLE class=MsoNormalTable style="BACKGROUND: white" cellPadding=0
bgColor=white border=0>
<TBODY>
<TR>
<TD
style="PADDING-RIGHT: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-BOTTOM: 0.75pt; PADDING-TOP: 0.75pt">
<P class=MsoNormal><FONT face="Times New Roman" color=black size=3><SPAN
style="FONT-SIZE: 12pt; COLOR: black; FONT-FAMILY: 'Times New Roman'"><BR>***********************************************************************************************<BR><BR>The information contained in this e-mail is strictly confidential, some or all<BR>of which may be legally privileged. It is for the intended recipient only.<BR>Access to this e-mail by any other person is prohibited. If you are not the<BR>intended recipient, any use, disclosure, copying, printing, distribution of,<BR>replying to or any action taken or omitted to be taken in reliance on this<BR>e-mail, is prohibited and may be unlawful. Please contact the sender immediately<BR>should this e-mail have been incorrectly addressed or transmitted.<BR><BR>You accept that any instructions are deemed to have been given at the time the<BR>recipient(s) accesses them and that delivery receipt does not constitute<BR>acknowledgement or receipt by the intended recipient(s). You accept that there<BR>may be a delay in processing the instructions received from e-mails after<BR>Charles Stanley has received them. You are advised that urgent, time sensitive<BR>and confidential communications should not be sent by e-mail. <BR><BR>You acknowledge that e-mails are not secure and you accept the risk of<BR>malfunction, viruses, unauthorised interference, mis-delivery or delay.<BR>************************************************************************************************<BR><BR><BR>Charles Stanley & Co. Ltd<BR>Registered Office: 25 Luke Street London EC2A 4AR<BR><BR>Tel: 0207 739 8200 Fax: 0207 739 7798<BR>Registered in England No. 1903304<BR><BR>Charles Stanley Sutherlands and Charles Stanley Securities are divisions of Charles Stanley & Co. Ltd<BR><BR>Authorised and Regulated by the Financial Services Authority, Member of the<BR>London Stock Exchange, International Securities Markets Association, and The London International Financial Futures &<BR>Options Exchange.<BR><BR>This footnote also confirms that this email message has been swept by McAfee<BR>VirusScan and SurfControl Email Filter software.</SPAN></FONT></P></TD></TR></TBODY></TABLE>
<P class=MsoNormal><FONT face="Times New Roman" size=3><SPAN lang=EN-US
style="FONT-SIZE: 12pt; FONT-FAMILY: 'Times New Roman'"></SPAN></FONT> </P>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT face=Arial
color=gray size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: gray; FONT-FAMILY: Arial">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<P><STRONG><B><FONT face=Verdana color=gray size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: gray; FONT-FAMILY: Verdana">CONFIDENTIALITY
STATEMENT</SPAN></FONT></B></STRONG></P>
<P><FONT face=Verdana color=gray size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: gray; FONT-FAMILY: Verdana">This communication
and any attachments are <STRONG><B><FONT face=Verdana><SPAN
style="FONT-FAMILY: Verdana">CONFIDENTIAL</SPAN></FONT></B></STRONG> and may be
protected by one or more legal privileges. It is intended solely for the use of
the addressee identified above. If you are not the intended recipient, any use,
disclosure, copying or distribution of this communication is
<STRONG><B><FONT face=Verdana><SPAN
style="FONT-FAMILY: Verdana">UNAUTHORIZED</SPAN></FONT></B></STRONG>. Neither
this information block, the typed name of the sender, nor anything else in this
message is intended to constitute an electronic signature unless a specific
statement to the contrary is included in this message. If you have received
this communication in error, please immediately contact me and delete
this communication from your computer. Thank you.</SPAN></FONT></P>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT face=Arial
color=gray size=2><SPAN lang=EN-US
style="FONT-SIZE: 10pt; COLOR: gray; FONT-FAMILY: Arial">
<HR align=center width="100%" SIZE=2>
</SPAN></FONT></DIV></DIV><BR><BR>
<TABLE style="COLOR: black" bgColor=white>
<TBODY>
<TR>
<TD><BR>***********************************************************************************************<BR><BR>The information contained in this e-mail is strictly confidential, some or all<BR>of which may be legally privileged. It is for the intended recipient only.<BR>Access to this e-mail by any other person is prohibited. If you are not the<BR>intended recipient, any use, disclosure, copying, printing, distribution of,<BR>replying to or any action taken or omitted to be taken in reliance on this<BR>e-mail, is prohibited and may be unlawful. Please contact the sender immediately<BR>should this e-mail have been incorrectly addressed or transmitted.<BR><BR>You accept that any instructions are deemed to have been given at the time the<BR>recipient(s) accesses them and that delivery receipt does not constitute<BR>acknowledgement or receipt by the intended recipient(s). You accept that there<BR>may be a delay in processing the instructions received from e-mails after<BR>Charles Stanley has received them. You are advised that urgent, time sensitive<BR>and confidential communications should not be sent by e-mail. <BR><BR>You acknowledge that e-mails are not secure and you accept the risk of<BR>malfunction, viruses, unauthorised interference, mis-delivery or delay.<BR>************************************************************************************************<BR><BR><BR>Charles Stanley & Co. Ltd<BR>Registered Office: 25 Luke Street London EC2A 4AR<BR><BR>Tel: 0207 739 8200 Fax: 0207 739 7798<BR>Registered in England No. 1903304<BR><BR>Charles Stanley Sutherlands and Charles Stanley Securities are divisions of Charles Stanley & Co. Ltd<BR><BR>Authorised and Regulated by the Financial Services Authority, Member of the<BR>London Stock Exchange, International Securities Markets Association, and The London International Financial Futures &<BR>Options Exchange.<BR><BR>This footnote also confirms that this email message has been swept by McAfee<BR>VirusScan and SurfControl Email Filter software.<BR></TD></TR></TBODY></TABLE></BODY></HTML>