I just set up a 2811 with a VWIC-2MFT-T1, you will need some onboard DSPs if you want to use the HWIC slots.<br><br>If you go to CCO and search for the DSP Calculator it will tell you what dsps you will need for your application.
<br><br><div><span class="gmail_quote">On 9/20/06, <b class="gmail_sendername"><a href="mailto:bababooey@cox.net">bababooey@cox.net</a></b> <<a href="mailto:bababooey@cox.net">bababooey@cox.net</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Can someone help me out, can I put a VWIC-2MFT1 in the HWIC slot of the 28/3800 series routers? Or do I need to add onboard DSP modules to support them.<br>Is there a good link to describe this?<br><br>I need a 2800 with on T1 interface to a PBX. What is the best config,
<br>router-vwic+dsp's or<br>router-nm-hd-ve-vwic (dsp onboard nm card)<br><br><br>Thanks for your help<br><br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">
cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></blockquote></div><br><br clear="all"><br>-- <br>Ed Leatherman<br>
Senior Voice Engineer<br>West Virginia University<br>Telecommunications and Network Operations