<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
aka 'live feed':<br>
<a class="moz-txt-link-freetext" href="http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d1c31.html#wp1132847">http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d1c31.html#wp1132847</a><br>
<br>
"The recommended interface for live-feed MOH is an analog E&M port
because it requires the minimum number of external components. You
connect a line-level audio feed (standard audio jack) directly to pins
3 and 6 of an E&M RJ-45 connector."<br>
<br>
"If you are using an FXO voice port for live-feed MOH instead of an
E&M port, connect the MOH source to the FXO voice port. This
connection requires an external adapter to supply normal telephone
company (telco) battery voltage with the correct polarity to the tip
and ring leads of the FXO port. The adapter must also provide
transformer-based isolation between the external audio source and the
tip and ring leads of the FXO port."<br>
<br>
/Wes<br>
<br>
Bill Riley III wrote:
<blockquote
cite="mid2B3745BC9D31514381A6FCC5E72D937316B28A@SMOMAIL.jhacorp.com"
type="cite">
<meta http-equiv="Content-Type" content="text/html; ">
<meta name="Generator" content="Microsoft Word 11 (filtered medium)">
<style>
<!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:Arial;
color:windowtext;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
{page:Section1;}
-->
</style>
<div class="Section1">
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"><o:p> </o:p></span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"><o:p> </o:p></span></font></p>
<p class="MsoNormal"><font face="Times New Roman" size="3"><span
style="font-size: 12pt;">I have a customer that is using Call manager
express. They have
recently purchased a live MOH system to play a Musak stream. The device
is made
by premier technologies. The only output is an RCA connection currently
but
they have a RCA to RJ-11 adaptor. I am trying to find out exactly what
I need
to connect the RJ-11 port from this MOH system into on my CCME system.
I asked
the vendor if it was an analog connection and if my device needed to
provide
dial tone. Their response was that it was a 5-ohm output with an
amplifier and
I needed to plug it into my phone systems MOH input. So rather than
going back
and fourth with them I decided to see if anyone has any experience with
these
type of devices and what you would suggest. Thanks for your help. <o:p></o:p></span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"><o:p> </o:p></span></font></p>
<p class="MsoNormal"><font face="Times New Roman" size="3"><span
style="font-size: 12pt;"><o:p> </o:p></span></font></p>
</div>
<pre>NOTICE: This electronic mail message and any files transmitted with it are intended exclusively
for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged
information. Any unauthorized review, use, printing, saving, copying, disclosure
or distribution is strictly prohibited. If you have received this message in error, please immediately
advise the sender by reply email and delete all copies.
</pre>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
</body>
</html>