<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:times new roman, new york, times, serif;font-size:12pt"><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;">Well, it depends. <br><br>Having one line appearance with multiple calls on it -- some people may like it, some may not. Some may like seeing multiple line appearances on their phone. <br><br>Some people may want calls to roll to VM when they are on call, or another line on their phone. <br><br><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;">----- Original Message ----<br>From: Tech Guy <techguy@gmail.com><br>To: cisco-voip@puck.nether.net<br>Sent: Thursday, October 12, 2006 2:22:35 PM<br>Subject: [cisco-voip] Can BAT help me with this?<br><br><div>Recently upgraded the CM servers here to 4.1(3) from 3.3(5). Now that they are on 4.1(3) and can utilize the "Max Number of Calls and Busy
Trigger" on a line I can get rid of the line / partition method they used to have multi lines.
</div>
<div> </div>
<div>Basically, they setup multiple partitions named "PAR_Line_1 and PAR_Line_2 and PAR_Line_3" then on each phone they setup one line as say extension 5555 in PAR_Line_1 and then next line is 5555 in PAR_Line_2 and so on.
</div>
<div> </div>
<div>I think this was fairly common practice before the 4.1 release right?</div>
<div> </div>
<div>Anyway, now I want to do some major house cleaning and get them all down to just one line in one partition. Before I start fumbling through the BAT tool I thought I would ask just to get some thoughts on it.</div>
<div>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br><a target="_blank" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></div></div><br></div></div><br></body></html>