<div>Hi Ryan,</div>
<div>&nbsp;</div>
<div>The connection&nbsp;between gateway and PBX is T1-CAS, I also have E&amp;M connection in another end. So in this situation, does the call from PBX conected phone to local POTS&nbsp;number occupy 2 T1-CAS channels? Many many thanks for your help.
</div>
<div>&nbsp;</div>
<div>Regards,</div>
<div>Alan<br><br>&nbsp;</div>
<div><span class="gmail_quote">2006/10/20, Ryan Ratliff &lt;<a href="mailto:rratliff@cisco.com">rratliff@cisco.com</a>&gt;:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">What is your connection to the PBX?&nbsp;&nbsp;Simply do not configure 'direct-<br>inward-dial' on the default pots dial-peer for the pbx connection and
<br>the router will play dial tone to collect digits before routing the<br>call.&nbsp;&nbsp; You'll then want to probably use cor to route all calls from<br>that pots dial-peer to hit a voip dial-peer pointing to the<br>gatekeeper (session target ras).&nbsp;&nbsp; Then route the call in the
<br>gatekeeper and have the appropriate dial-peers on both gateways to<br>send the call to the correct destination.<br><br><br>-Ryan<br><br>On Oct 19, 2006, at 12:36 PM, Alan Su wrote:<br><br>Dear All,<br><br>The planned topology is as below:
<br><br>&lt;PSTN&gt;----PBXA----GatewayA----Gatekeeper ----&lt;IP Network&gt;-----<br>GatewayB------PBXB-----&lt;PSTN&gt;<br><br>|<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; |<br><br>PhoneA<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;PhoneB<br><br>now I would like gatekeepr to perform the whole call routing control,
<br>for example: when PhoneA dial a number (even the POTS number), the<br>call will go to GatewayA and provide the dial tone to phoneA, and<br>then GatewayA query Gatekeeper for call routing decision, if<br>Gatekeeper decide the number belongs to local PSTN, it will direct
<br>the call back to GatewayA; and if Gatekeeper decide the number<br>belongs to remote PSTN, it will direct the call to GatewayB.<br><br>I'm not sure if this design will be working, but I'm wondering if<br>Gateway can provide the dial tone to PBX connected phone. Does anyone
<br>have clue about it? Thanks in advance for your kind help.<br><br><br>Regards,<br>Alan<br><br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net
</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></blockquote></div><br>