<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2180" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=593004017-03112006>Try:</SPAN></FONT></DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=593004017-03112006></SPAN></FONT> </DIV>
<DIV dir=ltr align=left><FONT><SPAN class=593004017-03112006>boot system flash
flash:c3745-ipbase-mz.123-9a.bin</SPAN></FONT></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Tech
Guy<BR><B>Sent:</B> Friday, November 03, 2006 10:30 AM<BR><B>To:</B>
cisco-voip@puck.nether.net<BR><B>Subject:</B> [cisco-voip] OT: Booting Multiple
IOS on 3745?<BR></FONT><BR></DIV>
<DIV></DIV>This is partially off topic I guess, the 3745 is being used as a
voice gateway so it is kinda voice related. :-)<BR><BR>Here is the issue,
I have one IOS on the 3745 flash, and another on the slot0: card.<BR><BR>I have
the following config to load the IOS off of the slot0: card:
<BR><BR>boot-start-marker<BR>boot system
slot0:c3745-advipservicesk9-mz.124-3f.bin<BR>boot system
flash:c3745-ipbase-mz.123-9a.bin<BR>boot-end-marker<BR><BR>With card in slot0:
it boots fine with the image I want.<BR><BR>However with the card not in the
slot, it just hangs at rommon.<BR><BR>I thought, that it would fail over to the
IOS on the second line in flash if it could not find the one in slot0 ?<BR><BR>I
know you can have it boot from a second IOS if there is a problem with the
first, but maybe only if they reside in the same location? <BR></BODY></HTML>