<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns="http://www.w3.org/TR/REC-html40" xmlns:v =
"urn:schemas-microsoft-com:vml" xmlns:o =
"urn:schemas-microsoft-com:office:office" xmlns:w =
"urn:schemas-microsoft-com:office:word" xmlns:st1 =
"urn:schemas-microsoft-com:office:smarttags"><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2976" name=GENERATOR><!--[if !mso]>
<STYLE>v\:* {
BEHAVIOR: url(#default#VML)
}
o\:* {
BEHAVIOR: url(#default#VML)
}
w\:* {
BEHAVIOR: url(#default#VML)
}
.shape {
BEHAVIOR: url(#default#VML)
}
</STYLE>
<![endif]--><o:SmartTagType name="PlaceType"
namespaceuri="urn:schemas-microsoft-com:office:smarttags"></o:SmartTagType><o:SmartTagType
name="PlaceName"
namespaceuri="urn:schemas-microsoft-com:office:smarttags"></o:SmartTagType><o:SmartTagType
name="place"
namespaceuri="urn:schemas-microsoft-com:office:smarttags"></o:SmartTagType><!--[if !mso]>
<STYLE>st1\:* {
BEHAVIOR: url(#default#ieooui)
}
</STYLE>
<![endif]-->
<STYLE>@font-face {
font-family: Tahoma;
}
@page Section1 {size: 8.5in 11.0in; margin: 1.0in 1.25in 1.0in 1.25in; }
P.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"
}
LI.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"
}
DIV.MsoNormal {
FONT-SIZE: 12pt; MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman"
}
A:link {
COLOR: blue; TEXT-DECORATION: underline
}
SPAN.MsoHyperlink {
COLOR: blue; TEXT-DECORATION: underline
}
A:visited {
COLOR: purple; TEXT-DECORATION: underline
}
SPAN.MsoHyperlinkFollowed {
COLOR: purple; TEXT-DECORATION: underline
}
SPAN.EmailStyle17 {
COLOR: windowtext; FONT-FAMILY: Arial; mso-style-type: personal
}
SPAN.EmailStyle18 {
COLOR: navy; FONT-FAMILY: Arial; mso-style-type: personal-reply
}
DIV.Section1 {
page: Section1
}
</STYLE>
</HEAD>
<BODY lang=EN-US vLink=purple link=blue>
<DIV dir=ltr align=left><SPAN class=266225115-03112006><FONT face=Arial
color=#0000ff size=2>HP does support hot pulling & plugging of devices. It
is assumed that you are replacing a failed drive & data may or may not be
corrupted when puling hot. Cisco does not support the pulling of drives hot is
the intention is to maintain this drive for disaster recovery. You should always
power down the server to remove drives unless you do not intend to retain the
data. Also if you are pulling drives you should test both drives to ensure they
are bootable. Lastly a 7845 should have a drive pulled from both Mirrored pairs
when disaster recovery is the goal.</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=266225115-03112006><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=266225115-03112006><FONT face=Arial
color=#0000ff size=2>Everything stated above is for Windows ONLY. ALWAYS ENSURE
YOU HAVE A GOOD BARS BACKUP!!!!!</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=266225115-03112006><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=266225115-03112006><FONT face=Arial
color=#0000ff size=2>Mike Lay</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=266225115-03112006><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=266225115-03112006></SPAN><SPAN
class=266225115-03112006><FONT face=Arial color=#0000ff size=2>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt; TEXT-ALIGN: center"
align=center><B style="mso-bidi-font-weight: normal"><U><SPAN lang=EN-GB
style="FONT-SIZE: 14pt; FONT-FAMILY: Tahoma"><FONT color=#000000>For MCS-7845
CallManager Servers<o:p></o:p></FONT></SPAN></U></B></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><o:p><FONT
color=#000000> </FONT></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt; TEXT-ALIGN: justify"><SPAN
lang=EN-GB style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><FONT color=#000000>On
MCS-7845 servers there are two separate RAID arrays: two disks in slots 0 and 1
(RAID Array A) and two disks in slots 2 and 3 (RAID Array
B).<o:p></o:p></FONT></SPAN></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt; TEXT-ALIGN: justify"><SPAN
lang=EN-GB style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><o:p><FONT
color=#000000> </FONT></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt; TEXT-ALIGN: justify"><SPAN
lang=EN-GB style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><FONT
color=#000000>Starting with the Publisher and then repeating the steps on the
Subscribers carry out the following steps.<SPAN style="mso-spacerun: yes">
</SPAN>With these steps you check the Fall Back and the upgrade drives before
continuing, this is to ensure your fallback scenario is
good.<o:p></o:p></FONT></SPAN></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><o:p><FONT
color=#000000> </FONT></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Label
up each drive with the server name AND drive slot number they are mounted
in.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Shut
down the server cleanly.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Partially
remove one drive from each RAID Array (We will refer to these drives as 0 and
2), leaving them half in their drive slots.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Start
up server and ensure when prompted for HDD recovery F2 is
selected.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Confirm
that windows boots fully.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Shut
down the server cleanly.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Reinsert
the original drives 0 and 2. <U>Do not use replacement disks at this
time</U>.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Completely
remove from each RAID Array, the drives that were just tested (We will refer to
these as drives as 1 and 3) ensuring you have label each disk with the slot
number it was just removed from (slots 1 or 3) AND the server
name.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Start
up server and ensure when prompted for HDD recovery F2 is
selected.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Confirm
windows boots fully.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><FONT
color=#000000><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Insert
the new replacement disks into drive slot 1 and drive slot 3.</SPAN></FONT><SPAN
lang=EN-GB style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><FONT
color=#000000><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Ship
the two removed disks to the address given below using the packaging the new
disks were shipped in.</SPAN></FONT><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><o:p></o:p></SPAN></P><B
style="mso-bidi-font-weight: normal"><SPAN lang=EN-GB
style="FONT-SIZE: 16pt; FONT-FAMILY: Tahoma; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-GB; mso-fareast-language: EN-US; mso-bidi-language: AR-SA"><BR
style="PAGE-BREAK-BEFORE: always" clear=all></SPAN></B>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"><SPAN lang=EN-GB
style="FONT-SIZE: 12pt; FONT-FAMILY: Tahoma"><o:p><FONT
color=#000000></FONT></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt; TEXT-ALIGN: justify"><SPAN
lang=EN-GB style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><FONT color=#000000>On
MCS-7835 servers there is only one RAID array: two disks in slots 0 and 1 (RAID
Array A).<o:p></o:p></FONT></SPAN></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt; TEXT-ALIGN: justify"><SPAN
lang=EN-GB style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><o:p><FONT
color=#000000> </FONT></o:p></SPAN></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt; TEXT-ALIGN: justify"><SPAN
lang=EN-GB style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><FONT
color=#000000>Starting with the Publisher and then repeating the steps on the
Subscribers carry out the following steps.<SPAN style="mso-spacerun: yes">
</SPAN>With these steps you check the Fall Back and the upgrade drives before
continuing, this is to ensure your fallback scenario is
good.<o:p></o:p></FONT></SPAN></P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><o:p><FONT
color=#000000> </FONT></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Label
up each drive with the server name AND drive slot number they are mounted
in.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Shut
down the server cleanly.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Partially
remove the lower drive (we will refer to this drive as drive 0) from the RAID
Array, leaving it half in its drive slot.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Start
up server and ensure when prompted for HDD recovery F2 is
selected.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Confirm
that windows boots fully.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Shut
down the server cleanly.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Reinsert
the original drive 0. <U>Do not use replacement disks at this
time</U>.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Completely
remove from the RAID Array, the drive that was just tested (We will refer to
this drive as drive 1) ensuring you have label the disk with the slot number it
was just removed from (slots 1) AND the server name.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Start
up server and ensure when prompted for HDD recovery F2 is
selected.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><SPAN
lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol; mso-fareast-language: EN-GB"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Confirm
windows boots fully.<o:p></o:p></SPAN></P>
<P class=MsoNormal
style="MARGIN: 0in 0in 0pt 0.25in; TEXT-INDENT: -0.25in; TEXT-ALIGN: justify; mso-list: l0 level1 lfo1; tab-stops: list .25in left 1.0in; mso-layout-grid-align: none"><FONT
color=#000000><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; FONT-FAMILY: Symbol; mso-fareast-font-family: Symbol; mso-bidi-font-family: Symbol"><SPAN
style="mso-list: Ignore">·<SPAN
style="FONT: 7pt 'Times New Roman'">
</SPAN></SPAN></SPAN><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; COLOR: black; FONT-FAMILY: Tahoma; mso-fareast-language: EN-GB">Insert
the new replacement disks into drive slot 1.</SPAN></FONT><SPAN lang=EN-GB
style="FONT-SIZE: 11pt; FONT-FAMILY: Tahoma"><o:p></o:p></SPAN></P></FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=266225115-03112006><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Voll,
Scott<BR><B>Sent:</B> Friday, November 03, 2006 9:48 AM<BR><B>To:</B> Klaczko,
Edwin; cisco-voip@puck.nether.net<BR><B>Subject:</B> Re: [cisco-voip] Break
Mirror on HP MCS<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV class=Section1>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">I always shut down the
Server…. Pull the drive…. Power up the server…. Then put in the new
drive.<o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">I have never pulled a
drive in use. Probably not the best option.<o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">Scott<o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial color=navy size=2><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></P>
<DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center><FONT
face="Times New Roman" size=3><SPAN style="FONT-SIZE: 12pt">
<HR tabIndex=-1 align=center width="100%" SIZE=2>
</SPAN></FONT></DIV>
<P class=MsoNormal><B><FONT face=Tahoma size=2><SPAN
style="FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">From:</SPAN></FONT></B><FONT
face=Tahoma size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Tahoma">
cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net]
<B><SPAN style="FONT-WEIGHT: bold">On Behalf Of </SPAN></B>Klaczko,
Edwin<BR><B><SPAN style="FONT-WEIGHT: bold">Sent:</SPAN></B> Friday, November
03, 2006 6:17 AM<BR><B><SPAN style="FONT-WEIGHT: bold">To:</SPAN></B>
cisco-voip@puck.nether.net<BR><B><SPAN
style="FONT-WEIGHT: bold">Subject:</SPAN></B> [cisco-voip] Break Mirror on HP
MCS</SPAN></FONT><o:p></o:p></P></DIV>
<P class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><o:p> </o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">I’ve ordered some spare HDs and
wanted to use them to keep an extra backup. I’m used to working with Dell
servers and had a bad experience pulling a hot-swap drive live. Their RAID
controller allows you to power down a drive to remove it. I couldn’t find
a similar feature on the HP interface. Is this necessary or is it safe
just to pull the drive live. Any help would be
appreciated.<o:p></o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"><o:p> </o:p></SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Eddie
Klaczko</SPAN></FONT><o:p></o:p></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">IP Telephony / Network
Specialist</SPAN></FONT><o:p></o:p></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">CC <st1:place
w:st="on"><st1:PlaceName w:st="on">Schaumburg</st1:PlaceName> <st1:PlaceType
w:st="on">School District</st1:PlaceType></st1:place>
54</SPAN></FONT><o:p></o:p></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">eklaczko@sd54.org</SPAN></FONT><o:p></o:p></P>
<P class=MsoNormal><FONT face="Times New Roman" size=3><SPAN
style="FONT-SIZE: 12pt"><o:p> </o:p></SPAN></FONT></P></DIV></BODY></HTML>