<div>This might be a tuff one to explain...</div>
<div> </div>
<div>I have callmanager 4.x at my core with cisco ip phones at remote sites across my wan. Also, at these remote sites i have a non-cisco ip phone system that has an ip trunk to the callmanager. </div>
<div> </div>
<div>Everything is working fine, other than when the remote ip phone calls the phone system at the same site, the rtp goes twice across the wan, once to the callmanager, and then back again to the same same site and the ip phone pbx.
</div>
<div> </div>
<div>I have verified the media path on both the Cisco IP phone webpage and on the non-cisco pbx. </div>
<div> </div>
<div>Is there any way to shuffle (non hairpin) a call so that it does not traverse the WAN? I have even placed a cisco ip2ip gateway in the mix at the remote site and built the ip trunk to it from the non-cisco pbx, but the call rtp still goes across the wan.
</div>
<div> </div>
<div>Any idea? </div>
<div><br>-- <br>Nick Marus<br><a href="mailto:nmarus@gmail.com">nmarus@gmail.com</a> </div>