Hi<br><br>I'm testing a customer's analog lines in preparation for migrating them off of their key system onto the corporate CCM system. They have 4 analog DID trunks that work fine on the key system. I have a 2821 gateway with a VIC2-4FXS/DID card. When I connect the DID trunks to the FXS/DID port and place an incoming call to a DID I immediately get fast busy. I believe the signaling to be wink-start but I've tried setting the ports to immediate and delay with no success. Here's the configuration for one of the ports.
<br><br>voice-port 0/2/0<br> signal did immediate<br><br>What seems odd to me is that when I debug vpm signal and vtsp all I don't see anything when I place the call. There's no debug output and the port is never activated (the green light does not come on). I'm trying to get in touch with the telco but I thought I'd ask here in the mean time.
<br><br><br>I know the card is good (at least it works fine when configured as a station port card). Is there anything else I'm missing? <br clear="all"><br>-- <br>kris seraphine