<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2995" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=468480317-04122006><FONT face=Arial
color=#0000ff size=2>I disagree. You can just route the DIDs you want from
the Nortel to CCM over the QSIG. You don't have to route the whole
block. As you migrate one user from the Nortel to CCM, you route his DID
on the Nortel.</FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Mike Lay
(milay)<BR><B>Sent:</B> Monday, December 04, 2006 11:33 AM<BR><B>To:</B>
Jonathan Charles; cisco voip<BR><B>Subject:</B> Re: [cisco-voip] Meridian Call
Routing<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV dir=ltr align=left><SPAN class=765413116-04122006><FONT face=Arial
color=#0000ff size=2>It can be done but will be a very ugly Route plan in CCM! I
would recommend that you implement some type of prefix in the NT & the CM
until the migration is complete. After the migration is complete the prefix will
not be needed & you may return to a more simple dial
plan.</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=765413116-04122006><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=765413116-04122006><FONT face=Arial
color=#0000ff size=2>Mike</FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Jonathan
Charles<BR><B>Sent:</B> Monday, December 04, 2006 10:27 AM<BR><B>To:</B> cisco
voip<BR><B>Subject:</B> [cisco-voip] Meridian Call Routing<BR></FONT><BR></DIV>
<DIV></DIV>Customer is migrating (way too slowly) from Meridian to VoIP
(CallManager).<BR><BR>Customer has around 300 phones, they want to move 50
phones over to CallManager (already in place), but the phones are random (I
cannot figure out how they were picked). <BR><BR>These 100 phones are intermixed
(DID-wise, so extensions 2940-2340 are on the PBX, 2341, will be moved, 2342
will stay on the PBX, etc...) all calls come in on six PRIs, which are connected
to the Meridian... Selecting a contiguous range of DIDs is not an option.
<BR><BR>Can I route individual DIDs over a QSIG trunk to the CCM? (IOW, call
comes into PBX for x2341, gets routed over QSIG to 2851 for CCM)? Or only
blocks?<BR><BR><BR><BR>Thanx...<BR><BR><BR><BR>Jonathan<BR></BODY></HTML>