Are you saying to route all calls to the CCM, and then route the individual blocks back to Nortel, or vice-versa? I have no idea how the Meridian works, the PBX guy is uncooperative (he knows he is losing his job and he has no interest in learning "that networking crap" too bad for him)...
<br><br>On the Meridian, can we route the individual DIDs that are over on CCM back out to a QSIG trunk though?<br><br><br><br>Jonathan<br><br><div><span class="gmail_quote">On 12/4/06, <b class="gmail_sendername">Mike Lay (milay)
</b> <<a href="mailto:milay@cisco.com">milay@cisco.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div>
<div dir="ltr" align="left"><span><font color="#0000ff" face="Arial" size="2">It can be done but will be a very ugly Route plan in CCM! I
would recommend that you implement some type of prefix in the NT & the CM
until the migration is complete. After the migration is complete the prefix will
not be needed & you may return to a more simple dial
plan.</font></span></div>
<div dir="ltr" align="left"><span><font color="#0000ff" face="Arial" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font color="#0000ff" face="Arial" size="2">Mike</font></span></div><br>
<div dir="ltr" align="left" lang="en-us">
<hr>
<font face="Tahoma" size="2"><b>From:</b> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voip-bounces@puck.nether.net</a>
[mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Jonathan
Charles<br><b>Sent:</b> Monday, December 04, 2006 10:27 AM<br><b>To:</b> cisco
voip<br><b>Subject:</b> [cisco-voip] Meridian Call Routing<br></font><br></div><div><span class="e" id="q_10f4e503578d76c9_1">
<div></div>Customer is migrating (way too slowly) from Meridian to VoIP
(CallManager).<br><br>Customer has around 300 phones, they want to move 50
phones over to CallManager (already in place), but the phones are random (I
cannot figure out how they were picked). <br><br>These 100 phones are intermixed
(DID-wise, so extensions 2940-2340 are on the PBX, 2341, will be moved, 2342
will stay on the PBX, etc...) all calls come in on six PRIs, which are connected
to the Meridian... Selecting a contiguous range of DIDs is not an option.
<br><br>Can I route individual DIDs over a QSIG trunk to the CCM? (IOW, call
comes into PBX for x2341, gets routed over QSIG to 2851 for CCM)? Or only
blocks?<br><br><br><br>Thanx...<br><br><br><br>Jonathan<br></span></div></div>
</blockquote></div><br>