here is the debug of q931.<br>my dn is 1112222412 and the number i call is 3012223333, pstn number.<br>the numbers have been changed to protect the id.<br><br><br><br>voip#debug isdn q931 <br>voip#<br>Dec 18 13:39:25: ISDN Se0/3/1:23 Q931: TX -> SETUP pd = 8 callref = 0x0233
<br> Bearer Capability i = 0x8090A2 <br> Standard = CCITT <br> Transfer Capability = Speech <br> Transfer Mode = Circuit <br> Transfer Rate = 64 kbit/s <br>
Channel ID i = 0xA98381 <br> Exclusive, Channel 1 <br> Calling Party Number i = 0x2181, '1112222412' <--------(((((my dn, voip phone)<br> Plan:ISDN, Type:National <br> Called Party Number i = 0xA1, '3012223333' <-------------((((out side pstn number)
<br> Plan:ISDN, Type:National<br>Dec 18 13:39:25: ISDN Se0/3/1:23 Q931: RX <- CALL_PROC pd = 8 callref = 0x8233 <br> Channel ID i = 0xA98381 <br> Exclusive, Channel 1<br><br><br><br>
<br><br><div><span class="gmail_quote">On 12/13/06, <b class="gmail_sendername">Ted Nugent</b> <<a href="mailto:tednugent69@yahoo.com">tednugent69@yahoo.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
95% of the time the problem is with the provider. You<br>can send them anything that you want in the the<br>Display IE or FacilityIE but if they don't have your<br>DID block "masked" (for lack of a better word)<br>
correctly then no CID. You might try getting with them<br>and see what they're receiving for starters and if<br>they will pass it along if you provide it "correctly"<br>or if they need to lock in your corp name for your
<br>entire block. At any rate if they tell you that they<br>can pass along if you're configured for X then we can<br>tell you how to configure for X. My experience is that<br>your DID block will be masked by your provider with
<br>your corp name and that is the best that they can<br>provide without some sort of act of congress. Also, I<br>know this might sounds obvious however I've had<br>customers that were doing this but you can't test this<br>
by calling your mobile phone since most of them will<br>never show you the name display.<br>Ted<br><br><br>--- kevin k <<a href="mailto:kds850@gmail.com">kds850@gmail.com</a>> wrote:<br><br>> i have the following config on 3845 with pri
<br>> dial-peer voice 1 pots<br>> description outbound to PSTN Local<br>> destination-pattern ..........<br>> direct-inward-dial<br>> port 0/0/0:23<br>><br>> and did of lets say 111-222-3000 thru 111-222-3999
<br>><br>> the odd thing is the called id works for incoming<br>> really well.<br>> but for the outgoing calls only the "111-222-3000"<br>> will show up.<br>><br>> anyway to fix it?<br>><br>
> thanks<br>> > _______________________________________________<br>> cisco-voip mailing list<br>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>><br><br><br><br><br>____________________________________________________________________________________<br>Want to start your own business?<br>Learn how on Yahoo! Small Business.
<br><a href="http://smallbusiness.yahoo.com/r-index">http://smallbusiness.yahoo.com/r-index</a><br></blockquote></div><br>