<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.3020" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=330233913-19122006><FONT face=Arial
size=2>I've seen certain providers that would only allow ANI through if it
matched your DID range so this could very well be what Verizon is doing to
you.</FONT></SPAN></DIV><!-- Converted from text/plain format -->
<P><FONT size=2>-Ryan </FONT></P>
<DIV> </DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>kevin
k<BR><B>Sent:</B> Tuesday, December 19, 2006 8:27 AM<BR><B>To:</B> Ted
Nugent<BR><B>Cc:</B> cisco-voip@puck.nether.net<BR><B>Subject:</B> Re:
[cisco-voip] caller id + DID<BR></FONT><BR></DIV>
<DIV></DIV>i am still working on this caller-id issue.<BR>to rephrase the
situation, i got 3825 router running as gateway with PRI / DID from
verizon. it talks mgcp with ccm. as you see in this email, there is
that calling number sent via q931. <BR><BR><BR>*let me be more realistic, rather
than putting all fake number this time. i got block of 111-222-4800 thru 4900
thru DID. my DN is 111-453-2000<BR>so far the caller id that is received
on called party has been 111-222-4800 no matter who is calling. <BR><BR>today i
ran a few tests.<BR>device-gateway-caller id dn<BR>it was blank. so i put
2224810<BR>then i got 111-222-4810 as my calling number on the called
party.<BR>i put 453xxxx, because my dn is 4532000, then i get 2224800 on caller
id.<BR>i put 222xxxx, i get 2224800 on caller id. <BR><BR>i got a few suspicion
which i like to confirm.<BR><BR>does my DN has to be in the same block as the
DID i am assigned to by provider?<BR>i get the call if outsider calls me on my
DN.<BR><BR><BR><BR><BR>
<DIV><SPAN class=gmail_quote>On 12/18/06, <B class=gmail_sendername>kevin k</B>
<<A href="mailto:kds850@gmail.com">kds850@gmail.com</A>> wrote:</SPAN>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">here
is the debug of q931.<BR>my dn is 1112222412 and the number i call is
3012223333, pstn number.<BR>the numbers have been changed to protect the
id.<BR><BR><BR><BR>voip#debug isdn q931 <BR>voip#<BR>Dec 18 13:39:25: ISDN
Se0/3/1:23 Q931: TX -> SETUP pd = 8 callref = 0x0233
<BR> Bearer Capability i = 0x8090A2
<BR>
Standard = CCITT
<BR>
Transfer Capability = Speech
<BR>
Transfer Mode = Circuit
<BR>
Transfer Rate = 64 kbit/s <BR>
Channel ID i = 0xA98381
<BR>
Exclusive, Channel 1 <BR> Calling
Party Number i = 0x2181, '1112222412'
<--------(((((my dn, voip
phone)<BR>
Plan:ISDN, Type:National <BR> Called
Party Number i = 0xA1, '3012223333' <-------------((((out side
pstn number)
<BR>
Plan:ISDN, Type:National<BR>Dec 18 13:39:25: ISDN Se0/3/1:23 Q931: RX <-
CALL_PROC pd = 8 callref = 0x8233
<BR> Channel ID i = 0xA98381
<BR>
Exclusive, Channel 1
<DIV><SPAN class=e id=q_10f96e29349cfe02_1><BR><BR><BR><BR><BR><BR>
<DIV><SPAN class=gmail_quote>On 12/13/06, <B class=gmail_sendername>Ted
Nugent</B> <<A onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:tednugent69@yahoo.com" target=_blank>tednugent69@yahoo.com
</A>> wrote:</SPAN>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">95%
of the time the problem is with the provider. You<BR>can send them anything
that you want in the the<BR>Display IE or FacilityIE but if they don't have
your<BR>DID block "masked" (for lack of a better word) <BR>correctly then no
CID. You might try getting with them<BR>and see what they're receiving for
starters and if<BR>they will pass it along if you provide it
"correctly"<BR>or if they need to lock in your corp name for your <BR>entire
block. At any rate if they tell you that they<BR>can pass along if you're
configured for X then we can<BR>tell you how to configure for X. My
experience is that<BR>your DID block will be masked by your provider with
<BR>your corp name and that is the best that they can<BR>provide without
some sort of act of congress. Also, I<BR>know this might sounds obvious
however I've had<BR>customers that were doing this but you can't test this
<BR>by calling your mobile phone since most of them will<BR>never show you
the name display.<BR>Ted<BR><BR><BR>--- kevin k <<A
onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:kds850@gmail.com" target=_blank> kds850@gmail.com</A>>
wrote:<BR><BR>> i have the following config on 3845 with pri <BR>>
dial-peer voice 1 pots<BR>> description outbound to PSTN
Local<BR>> destination-pattern
..........<BR>> direct-inward-dial<BR>> port
0/0/0:23<BR>><BR>> and did of lets say 111-222-3000 thru 111-222-3999
<BR>><BR>> the odd thing is the called id works for incoming<BR>>
really well.<BR>> but for the outgoing calls only the
"111-222-3000"<BR>> will show up.<BR>><BR>> anyway to fix
it?<BR>> <BR>> thanks<BR>> >
_______________________________________________<BR>> cisco-voip mailing
list<BR>> <A onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:cisco-voip@puck.nether.net"
target=_blank>cisco-voip@puck.nether.net</A><BR>> <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target=_blank>https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>><BR><BR><BR><BR><BR>____________________________________________________________________________________<BR>Want
to start your own business?<BR>Learn how on Yahoo! Small Business. <BR><A
onclick="return top.js.OpenExtLink(window,event,this)"
href="http://smallbusiness.yahoo.com/r-index"
target=_blank>http://smallbusiness.yahoo.com/r-index</A><BR></BLOCKQUOTE></DIV><BR></SPAN></DIV></BLOCKQUOTE></DIV><BR></BODY></HTML>