Under the voip dial-peer... dtmf-relay<br><br><div><span class="gmail_quote">On 12/20/06, <b class="gmail_sendername">Voll, Scott</b> <<a href="mailto:Scott.Voll@wesd.org">Scott.Voll@wesd.org</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
We have an issue like this also. So far what we know is that the far<br>side doesn't show the call as being connected.<br><br>All the Q931 setup / ack /etc happened except the connect. Since there<br>is no Connect.... there is no DTMF.
<br><br>Scott<br><br><br><br>-----Original Message-----<br>From: <a href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a><br>[mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net
</a>] On Behalf Of Robert<br>Kulagowski<br>Sent: Wednesday, December 20, 2006 10:04 AM<br>To: Jonathan Charles<br>Cc: <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>Subject: Re: [cisco-voip] Can't use Telstralink conferencing service -
<br>DTMF tone duration?<br><br>Jonathan Charles wrote:<br>> Which DTMF encoding are you using, relay or pass-through?<br><br>Hrmm - where would this be, on the voice port or the dial-peer? Right<br>now I don't have it anywhere.
<br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></blockquote></div><br>