But that isn't 'everything' I need to know.<br><br>I want to know the mods... not just the model numbers for latest and greatest, I want a list of everything that is supported (and will be by TAC)<br><br>So, for instance...
<br><br>I have a cust that has a lot of DL380 G3s... how do I need to configure that bad boy so I can install CCM5?<br><br>I have another customer that has a DL320 G4 (P4 3.4Ghz, dual 80GB SATA, 2GB of RAM), CCM5 installed fine, no probs...
<br><br>However, a single 2.8Ghz Xeon with 2GB of RAM and dual 72GB U320 SCSI drives failed the hardware check... (so did a dual 2.4Ghz Xeon with 4GB of RAM and dual 72GB U320s...)<br><br>So, is there a G3 config that will work?
<br><br>(as far as I can get from that page, a single 2.4Ghz Xeon with 2 36Gb drives should work... which doesn't make sense... a dual Xeon with more HD space fails?? What????)<br><br>I think there should be logic behind this, there appears to not be.
<br><br>BTW, I think the dual Xeon box is faster than the crappy DL320..<br><br>Here's for fun... they don't have any DL380G3s with 2.4Ghz processors left, they do have a 380 with a 3060Mhz box, but they want to use it for their Unity server... They have literally dozens of the
2.8s, but they aren't supported.<br><br>This is slowly getting into 'this blows' territory....<br><br>I am going to have retask something here... <br><br><br><br>Jonathan<br><br><br><div><span class="gmail_quote">
On 1/2/07, <b class="gmail_sendername">Ryan Ratliff</b> <<a href="mailto:rratliff@cisco.com">rratliff@cisco.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Everything you need to know about Cisco MCS servers both hardare and<br>software can be found at <a href="http://www.cisco.com/go/swonly">http://www.cisco.com/go/swonly</a>.<br><br>-Ryan<br><br>On Jan 2, 2007, at 12:43 PM, Jonathan Charles wrote:
<br><br>I need a list of HP hardware equivalents that will support<br>CallManager 5...<br><br>Customer has an HP contract and will not buy Cisco servers...<br><br>They also have a crapload of HP servers lying around and don't see
<br>the reason to buy another one... (all servers are G3s, combination of<br>DL320s, 360s and 380s).<br><br>I am looking for hardware specs for each that Cisco will allow an<br>install on (I would rather get a list and match requirements than do
<br>the trial and error thing...)<br><br><br><br><br>Jonathan<br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></blockquote></div><br>