<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.3020" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=297112216-17012007><FONT face=Arial
color=#0000ff size=2><A
href="http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item09186a00800a6763.shtml#q13">http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item09186a00800a6763.shtml#q13</A></FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=297112216-17012007><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=297112216-17012007><FONT face=Arial
color=#0000ff size=2>Mike</FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Alan
Su<BR><B>Sent:</B> Wednesday, January 17, 2007 10:20 AM<BR><B>To:</B>
cisco-voip@puck.nether.net<BR><B>Subject:</B> [cisco-voip] CCM "provide out-side
dial tone" problem<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV>Dear All,</DIV>
<DIV> </DIV>
<DIV>I have a route pattern "9" in CCM 4.02 which pointing to a voice gateway,
the voice gateway have severial dial-peers with destination pattern begging with
9 (such as 91315T, 91206T... etc). What I tried to do is when user dial "9",
he/she can hear a dial tone from CCM and then he/she can dial the following
digits(ex: 13153824604) and gateway will pick the matched dial-peer to send the
digits to remote site voice gateway and then to PSTN for toll saving. I already
check the "provide outside dial tone" in route pattern, but there is no dial
tone provided after dialing "9". What else configuration I need to do in CCM or
in voice gateway? Any comments will be truely grateful. Thanks a lot. </DIV>
<DIV> </DIV>
<DIV>Regards,</DIV>
<DIV>Alan</DIV></BODY></HTML>