<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML dir=ltr><HEAD>
<META content="MSHTML 6.00.2800.1522" name=GENERATOR></HEAD>
<BODY>
<DIV id=idOWAReplyText62820 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>Can anyone reference a
SRND/CCO article on best practice for binding the RTP audio
stream?</FONT></DIV></DIV>
<P dir=ltr><FONT face="Courier New"></FONT></P>
<DIV dir=ltr><FONT face="Courier New">For small branch offices I've always used
same L3 interface (voice vlan) as the 7900 IP Phones for binding the RTP audio
stream (versus using a Loopback), this way you don't have to route (if source
was loopback) any RTP packets for local calls out the local POTS PRI interface.
Use the same interface for SRST under "call-manager-fallback, ip source-address
x.y.z.a" and CCMAdmin > SRST</FONT></DIV>
<DIV dir=ltr><FONT face="Courier New"></FONT> </DIV>
<DIV dir=ltr> <BR><FONT size=3><TT>mgcp bind control source-interface
FastEthernet0/0.408<BR>mgcp bind media source-interface
FastEthernet0/0.408</TT></FONT> <BR><BR></DIV>
<DIV dir=ltr> </DIV></BODY></HTML>
<HTML><BODY><P><hr size=1></P>
<P><STRONG>
Disclaimer:
This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
</STRONG></P></BODY></HTML>