<br><font size=2 face="sans-serif">Paul </font>
<br>
<br><font size=2 face="sans-serif">you are correct</font>
<br>
<br><font size=2 face="sans-serif">T1 PRI is 23B+1D</font>
<br><font size=2 face="sans-serif">E1 PRI is 30B+2D</font>
<br>
<br><font size=2 face="sans-serif">T1 CAS however is 24B</font>
<br><font size=2 face="sans-serif">E1 CAS is still 30B if I remember correctly</font>
<br>
<br><font size=2 face="sans-serif">Craig<br>
<br>
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>Paul Choi <asobihoudai@yahoo.com></b>
</font>
<br><font size=1 face="sans-serif">Sent by: cisco-voip-bounces@puck.nether.net</font>
<p><font size=1 face="sans-serif">01/31/2007 01:32 PM</font>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td><font size=1 face="sans-serif">cisco-voip@puck.nether.net</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">Re: [cisco-voip] Lack of DSP resources?</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><tt><font size=2><br>
--- "Wydra, Jason" <jason.wydra@berbee.com> wrote:<br>
<br>
> If I have a PVDM2-48 and I'm setting up 2 PRIs for<br>
> 24 channels, why on the second PRI when I run the<br>
> pri-group timeslots command it tells me I don't have<br>
> enough resources and I can only configure 24<br>
> channels?<br>
<br>
Pardon me for asking this, I thought you only get 23<br>
channels per PRI (23B, 1D) unless you're using NFAS to<br>
have one delta channel control multiple PRI lines. I'd<br>
like to hear any clarification on this.<br>
<br>
If you're using standard sig, you should have 46<br>
bearer channels for voice and two delta channels, no?<br>
<br>
<br>
<br>
____________________________________________________________________________________<br>
Have a burning question? <br>
Go to www.Answers.yahoo.com and get answers from real people who know.<br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
https://puck.nether.net/mailman/listinfo/cisco-voip<br>
</font></tt>
<br>