First, do a show isdn status... send your output...<br><br>Second, do a debug ISDN q931 and send us the output after calling a bunch of numbers...<br><br>Do some numbers work and not others? <br><br><br><br><br>Jonathan<br>
<br><div><span class="gmail_quote">On 2/14/07, <b class="gmail_sendername">Dane</b> <<a href="mailto:d4rkf1ber@gmail.com">d4rkf1ber@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Ok love that subject I know, but I can't figure this out and not sure<br>what the problem is.<br><br>I have two PRI's coming into a 3745 with a Controller T1 module/card.<br><br>You call in and you just get a busy signal.
<br><br>I do a debug isdn q931 and I see some calls, never seems to go above 5<br>active calls. I see some calls coming in on these controller t1 /<br>PRI's<br><br>However I keep getting a busy signal, and when I call I never seem to
<br>see anything happen in the debug isdn q931 so I question the call is<br>even making it to the controller. Yet they seem to be up and the<br>PRI's seem to be up.<br><br>I reset MGCP, I reset the gateway (which is this 3745) in callmanager.
<br> I have done a shut no shut on the controller T1 3/0 and 3/1<br><br>I almost think maybe the PRI's show up and the 3745 sees that, but<br>that maybe channels are down? I can't seem to show the status of<br>channels, is there not a command for that?
<br><br>Any ideas?<br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></blockquote></div><br>