<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3059" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Pretty sure I tried that and it wouldn't take the command. Or
did I try the serial port? Can't remember.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV>--------------------------------------------------------------------------------<BR>Lelio
Fulgenzi, B.A.<BR>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1<BR>(519) 824-4120 x56354 (519) 767-1060 FAX
(JNHN)<BR>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
<BR>...there's no such thing as a bad timbit...<BR></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=cbomba@s4nets.com href="mailto:cbomba@s4nets.com">Christopher M.
Bomba</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, February 28, 2007 8:14
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] dialpeers and trunk
groups</DIV>
<DIV><BR></DIV>Try putting the trunk-group commands on the voice-port 3/0:23
instead of the
controller.<BR><BR>Chris<BR><BR>_________________________________________________________________________________<BR><BR>Message:
1<BR>Date: Tue, 27 Feb 2007 13:53:12 -0500<BR>From: "Lelio Fulgenzi" <<A
href="mailto:lelio@uoguelph.ca">lelio@uoguelph.ca</A>><BR>Subject:
[cisco-voip] dialpeers and trunk groups<BR>To: <<A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A>><BR>Message-ID:
<<A
href="mailto:02f401c75aa0$87d37d40$47196883@cfs.uoguelph.ca">02f401c75aa0$87d37d40$47196883@cfs.uoguelph.ca</A>><BR>Content-Type:
text/plain; charset="iso-8859-1"<BR><BR>I'm trying to get trunk groups
working. I've followed the steps in the book, but I'm getting failures when
trying to make the call. When I remove the trunkgroup on the dialpeer and add
the port, calls go through fine. The dialpeer shows up and running (as far as
I can tell). Anyone know what I might be missing?<BR><BR>!<BR>trunk
group uogdev_pstn_tg<BR> hunt-scheme round-robin<BR>!<BR>trunk
group uogdev_911_tg<BR> hunt-scheme sequential<BR>!<BR>controller
T1 3/0<BR> framing esf<BR> linecode b8zs<BR> pri-group
timeslots 1-24 service mgcp<BR> trunk-group uogdev_pstn_tg timeslots
2-23<BR> trunk-group uogdev_911_tg timeslots 1<BR>!<BR>dial-peer voice
9519901 pots<BR> trunkgroup uogdev_pstn_tg<BR> corlist outgoing
uogdev-local-css<BR> destination-pattern
9519.......<BR> forward-digits
10<BR><BR>_______________________________________________<BR>cisco-voip
mailing list<BR><A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></BLOCKQUOTE></BODY></HTML>