Hi,<br><br>Maybe you can disble ip domain name and use only IP address in CCM and Gateway,<br><br>with sh ccm you must see the registration.<br><br>Rgds. <br><br><br><div><span class="gmail_quote">On 3/2/07, <b class="gmail_sendername">
Jonathan Charles</b> <<a href="mailto:jonvoip@gmail.com">jonvoip@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div>In CCM, you need to setup the gateway name as:</div>
<div> </div>
<div><a href="http://GW2801.test.br" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">GW2801.test.br</a></div>
<div> </div>
<div>This is your hostname and your ip domain name...</div>
<div> </div>
<div>There is no other method.</div>
<div> </div>
<div>When you say it is 'active' on the gateway, that doesn't correspond to what it should say...</div>
<div> </div>
<div>If you do a:</div>
<div> </div>
<div>show ccm</div>
<div> </div>
<div>you should see it say primary and registered.</div>
<div> </div>
<div>And then on CCM, click on show endpoints and you should see a 'registered with...' if it is up.</div>
<div> </div>
<div> </div>
<div>Jonathan<br><br> </div>
<div><div><span class="e" id="q_111144837843ad74_1"><span class="gmail_quote">On 2/28/07, <b class="gmail_sendername">alsvrj</b> <<a href="mailto:alsvrj@superig.com.br" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
alsvrj@superig.com.br</a>> wrote:</span>
</span></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;"><div><span class="e" id="q_111144837843ad74_3">Hello All,<br><br>I have an 2801 connected to a Hicom 330 PBX through a ISDN PRI QSIG with
<br>MGCP and a CCM5.0
. I´m having a lot of problems to get the gateway<br>registration on CCM.<br><br>I would like to do some questions:<br>1- Is it possible to put an ISDN PRI with MGCP using QSIG signaling ?<br><br>Using the show isdn status command I´m seeing MULTIPLE_FRAME_ESTABILISHED
<br><br>I´m seeing too with the show ccm-manager that the MGCP is Active but I´m not<br>able to see this Gateway into the active state inside of CCM.<br><br>I´m using a VWIC-1MFT-E1 card to use this ISDN PRI.<br><br>2- Is it possible to put the IP Address instead of Domain Name when I´m
<br>creating the 2801 Gateway ?<br><br>Hey guys, I really need your help to solve this registration problem, I<br>kindly ask a hand into this situation.<br><br>Thanks for everything.<br><br>It follows below the configuration on the Gateway:
<br><br>hostname GW2801<br>!<br>boot-start-marker<br>boot system flash c2801-adventerprisek9-mz.124-6.T3.bin<br>boot-end-marker<br>!<br>logging buffered 4096 informational<br>enable secret 5 ********************<br>!<br>
no aaa new-model
<br>!<br>resource policy<br>!<br>clock timezone UTC -3<br>network-clock-participate wic 2<br>network-clock-select 1 E1 0/2/0<br>ip cef<br>!<br>!<br>!<br>!<br>ip tcp synwait-time 13<br>no ip domain lookup<br>ip domain name
<a href="http://test.br" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">test.br</a><br>ip name-server *.*.*.*<br>ip name-server *.*.*.*<br>ip name-server *.*.*.*<br>!<br>isdn switch-type primary-qsig
<br>isdn logging<br>!<br>voice-card 0<br>dsp services dspfarm<br>!<br>
!<br>voice call carrier capacity active<br>!<br>!<br>voice class codec 1<br>codec preference 1 g711ulaw<br>codec preference 2 g729r8 bytes 40<br>!<br>!<br>!<br>voice class h323 1<br>h225 timeout tcp establish 3<br>!<br>crypto configuration
<br>!<br>controller E1 0/2/0<br>framing NO-CRC4<br>line-termination 75-ohm<br>pri-group timeslots 1-31 service mgcp<br>!<br>!<br>interface FastEthernet0/0<br>ip address *.*.*.* *.*.*.*<br>speed 100<br>full-duplex<br>no cdp enable
<br>h323-gateway voip bind srcaddr *.*.*.*<br>!<br>interface FastEthernet0/1<br>no ip address<br>shutdown<br>duplex auto<br>speed auto<br>no cdp enable<br>!<br>interface Serial0/1/0<br>no ip address<br>shutdown<br>clock rate 2000000
<br>no cdp enable<br>!<br>interface Serial0/2/0:15<br>no ip address<br>no ip proxy-arp<br>encapsulation hdlc<br>isdn switch-type primary-qsig<br>isdn overlap-receiving<br>isdn incoming-voice voice<br>isdn supp-service name calling
<br>isdn bind-l3 ccm-manager<br>isdn negotiate-bchan<br>isdn bchan-number-order ascending<br>isdn sending-complete<br>no cdp enable<br>!<br>ip route <a href="http://0.0.0.0" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
0.0.0.0</a> <a href="http://0.0.0.0" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">0.0.0.0</a>
*.*.*.*<br>!<br>!<br>ip http server<br>ip http secure-server<br>!<br>logging *.*.*.*<br>access-list 1 permit *.*.*.*<br>access-list 1 permit *.*.*.*<br>dialer-list 1 protocol ip permit<br>snmp-server community voip RW 1
<br>
snmp-server community ext0399 RW 1<br>snmp-server community sw0399 RW 1<br>disable-eadi<br>no cdp run<br>!<br>control-plane<br>!<br>voice-port 0/2/0:15<br>!<br>ccm-manager mgcp<br>ccm-manager music-on-hold<br>ccm-manager config server *.*.*.*
<br>ccm-manager config<br>!<br>mgcp<br>mgcp call-agent *.*.*.* 2427 service-type mgcp version 0.1<br>mgcp dtmf-relay voip codec all mode out-of-band<br>mgcp rtp unreachable timeout 1000 action notify<br>mgcp modem passthrough voip mode nse
<br>mgcp package-capability rtp-package<br>no mgcp package-capability res-package<br>mgcp package-capability sst-package<br>no mgcp package-capability fxr-package<br>mgcp package-capability pre-package<br>no mgcp timer receive-rtcp
<br>mgcp sdp simple<br>mgcp fax t38 inhibit<br>mgcp rtp payload-type g726r16 static<br>!<br>mgcp profile default<br>!<br>!<br>dial-peer cor custom<br>!<br>!<br>!<br>dial-peer voice 1 pots<br>service mgcpapp<br>port 0/2/0:15
<br>!<br>!<br>!<br>line con 0<br>exec-timeout 0 0<br>password 7 *****************<br>logging synchronous<br>login<br>line aux 0<br>exec-timeout 0 0<br>password 7 *****************<br>logging synchronous<br>login<br>line vty 0 4
<br>exec-timeout 0 0<br>password 7 **************<br>logging synchronous<br>login<br>!<br>scheduler allocate 20000 1000<br>ntp clock-period 17180079<br>ntp server *.*.*.*<br>!<br>webvpn context Default_context<br>ssl authenticate verify all
<br>!<br>no inservice<br>end<br><br><br><br><br><br></span></div>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br></blockquote></div><br>
<br>_______________________________________________<br>cisco-voip mailing list<br><a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a onclick="return top.js.OpenExtLink(window,event,this)" href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br></blockquote></div><br><br clear="all"><br>-- <br>Omar E.P.T<br>-----------------<br>Certified Networking Professionals make better Connections!<br><br><a href="http://omarept.blogspot.com/">
http://omarept.blogspot.com/</a><br><br> Usysnet Corp<br>Open Source Solutions<br><a href="http://www.usysnet.com.pe">www.usysnet.com.pe</a>