<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7651.59">
<TITLE>Re: [cisco-voip] CCME "line not available" when trying to useconference feature</TITLE>
</HEAD>
<BODY>
<DIV id=idOWAReplyText91899 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>
<DIV><FONT face=Arial color=#000000 size=2>Hey all,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I'm stuck on this one. Here is the
scenario.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>IPT customer, with lots of phones. They are using a
Centralized model where CallManger and Unity are at the head office providing
services for head office and all branch locations. This is a big customer and DN
overlapp is a real issue so they decided they wanted to go 4 digit dialing
within a given site, and 10 digit dialing between sites.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>No problem</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<UL>
<LI><FONT face=Arial size=2>I setup each location with a different
<sitename>Oncluster Partition and added 4 digit DN's to these
partitions.</FONT>
<LI><FONT face=Arial size=2>phones can dial each other using 4 digits within a
site</FONT>
<LI><FONT face=Arial size=2>when they dial another site the must dial 11
digits. example to dial Edmonton they dial 917808885180</FONT>
<LI><FONT face=Arial size=2>A translation pattern is used to strip
the pattern and search the correct sites partition then strip the
91780888 off the number leaving 5180</FONT>
<LI><FONT face=Arial size=2>For centralized voicemail, I used different
"VoiceMailProfiles" to prefix the numbers going into Unity so when someone
from Edmonton dials into Unity 780888 is prefixed to the 5180
putting them into the correct mailbox.</FONT>
<LI><FONT face=Arial size=2>To light MWI lamps, I had to turn Multitenant Mode
on so that VM Ports can see the translations created and all works
fine</FONT></LI></UL>
<P>HERE is the problem</P>
<UL>
<LI>When someone has the same last 4 digit dn's at different sites,
MWI only works for the site who's partition comes first in the MWI
CSS </LI></UL>
<P>Example Calgary phone with DN 4035555180 and an Edmonton Phone 7808885180</P>
<UL>
<LI>Unity mailbox are as follows Calgary user is 4035555180 and the Edmonton
User is 7808885180
<LI>both message notification feilds under each subscriber have been changed
from the default X to 5180 because the actual extension is only 4 digits
not 10 (I THINK HERE IS MY PROBLEM BUT DON'T KNOW HOW TO FIX IT)
<LI>I leave a message for the Edmonton user
<LI>MWI outbound ports use the Translation pattern to translate 7808885180 to
5180 in the edmOnCluster partition. And tell the phone to dial the lamp code
<LI>The MWI-ON CSS has partitions in the order of cgyOncluster - then
edmOncluster. It doesn't know better it just matches 5180 to the cgyOncluster
and the lamp turns on.</LI></UL>
<P>I know you may need a decoder ring to understand this email, but any help is
appreciated</P>
<P> </P>
<P>Ryno</P></FONT></DIV></DIV>
<P><FONT face=Arial size=1>
<HR>
Privileged/Confidential Information may be contained in this message.
Disclosure to any person other than the named recipient is unauthorized.
If you are not the intended recipient, please delete all copies of this
information and kindly notify the sender by reply email. Opinions,
conclusions and other information in this message that do not relate to the
official business of UNIS LUMIN Inc. shall be understood as neither given nor
endorsed by it. UNIS LUMIN Inc. and any of its subsidiaries reserve the
right to monitor all e-mail communications through its networks. Thank
you.</FONT></P>
</BODY>
</HTML>