<br><font size=2 face="sans-serif">There is only one PRI on the router
and I'm checking with the team to make sure there have been no config changes.
Is this a known issue you have worked with TAC on or did you just come
across the problem yourself?</font>
<br>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>Erick Bergquist <erickbe@yahoo.com></b>
</font>
<p><font size=1 face="sans-serif">03/07/2007 12:37 PM</font>
<table border>
<tr valign=top>
<td bgcolor=white>
<div align=center><font size=1 face="sans-serif">Please respond to<br>
Erick Bergquist <erickbe@yahoo.com></font></div></table>
<br>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td><font size=1 face="sans-serif">CarlosOrtiz@bayviewfinancial.com</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td><font size=1 face="sans-serif">cisco-voip@puck.nether.net, cisco-voip-bounces@puck.nether.net</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">Re: [cisco-voip] PRI issue</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=3 face="Roman">Ok. Well, if you're certain there is enough
DSPs (PVDMs) in the router to handle the number of channels, etc (DSP Calculator
tool) , then rebooting the router should clear the issue.<br>
<br>
I have seen this issue in later 12.3T versions , but not in 12.4 yet...
<br>
</font>
<br><font size=3 face="Roman">----- Original Message ----<br>
From: "CarlosOrtiz@bayviewfinancial.com" <CarlosOrtiz@bayviewfinancial.com><br>
To: Erick Bergquist <erickbe@yahoo.com><br>
Cc: cisco-voip@puck.nether.net; cisco-voip-bounces@puck.nether.net<br>
Sent: Wednesday, March 7, 2007 11:18:49 AM<br>
Subject: Re: [cisco-voip] PRI issue<br>
<br>
</font><font size=2 face="sans-serif"><br>
The ports seem to be stuck in that state.</font><font size=3 face="Roman">
<br>
</font><font size=2 face="sans-serif"><br>
3845 - IOS 12.4.3, PVDM2 DSP's (hardware rev 3.2)</font><font size=3 face="Roman">
<br>
</font><font size=2 face="sans-serif"><br>
Seeing this message flooding the log indicating a DSP issue.</font><font size=3 face="Roman">
<br>
</font><font size=2 face="sans-serif"><br>
"Mar 7 12:12:56.569 EST: No dsps found either locally or globally!"</font><font size=3 face="Roman">
<br>
<br>
<br>
<br>
</font>
<table width=100%>
<tr valign=top>
<td width=39%><font size=1 face="sans-serif"><b>Erick Bergquist <erickbe@yahoo.com></b>
<br>
Sent by: cisco-voip-bounces@puck.nether.net</font><font size=3> </font>
<p><font size=1 face="sans-serif">03/07/2007 12:11 PM</font><font size=3>
</font>
<br>
<table border=4 width=100%>
<tr valign=top>
<td width=100% bgcolor=white>
<div align=center><font size=1 face="sans-serif">Please respond to<br>
Erick Bergquist <erickbe@yahoo.com></font></div></table>
<p>
<td width=60%>
<br>
<table width=100%>
<tr valign=top>
<td width=11%>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td width=88%><font size=1 face="sans-serif">CarlosOrtiz@bayviewfinancial.com,
cisco-voip@puck.nether.net</font><font size=3> </font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">Re: [cisco-voip] PRI issue</font></table>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=50%>
<td width=50%></table>
<br></table>
<br><font size=3 face="Roman"><br>
<br>
<br>
Are the ports always in the SETUP_FAIL state or do they cycle between different
states?<br>
Anything in the router log indicating what may have triggered this?<br>
<br>
What version IOS? What version DSP? <br>
<br>
----- Original Message ----<br>
From: "CarlosOrtiz@bayviewfinancial.com" <CarlosOrtiz@bayviewfinancial.com><br>
To: cisco-voip@puck.nether.net<br>
Sent: Wednesday, March 7, 2007 11:05:36 AM<br>
Subject: [cisco-voip] PRI issue<br>
</font><font size=2 face="sans-serif"><br>
<br>
I have an office experiencing some difficulties making outbound calls.
Some seem to get through and other just hang.</font><font size=3 face="Roman">
</font><font size=2 face="sans-serif"><br>
<br>
Here is a sh voice call summ</font><font size=3 face="Roman"> </font><font size=2 face="sans-serif"><br>
<br>
PORT CODEC VAD VTSP STATE
VPM STATE</font><font size=3 face="Roman">
</font><font size=2 face="sans-serif"><br>
============== ======== === ==================== ======================</font><font size=3 face="Roman">
</font><font size=2 face="sans-serif"><br>
0/0/1:23.1 g711ulaw n S_CONNECT
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.2 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.3 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.4 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.5 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.6 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.7 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.8 g711ulaw n S_WAIT_STATS
S_TSP_WAIT_RELEASE <br>
0/0/1:23.9 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.10 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.11 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.12 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.13 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.14 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.15 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.16 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.17 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.18 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.19 g729r8 n S_CONNECT
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.20 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.21 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL <br>
0/0/1:23.22 g711ulaw n S_CONNECT
S_TSP_CONNECT
</font><font size=3 face="Roman"> </font><font size=2 face="sans-serif"><br>
0/0/1:23.23 None - S_SETUP_FAIL
S_TSP_WAIT_RELEASE_COMPL</font><font size=3 face="Roman">
<br>
</font><font size=2 face="sans-serif"><br>
<br>
I found something similar on CCO but it referred to FXO ports. Is
this a possible DSP issue?</font><font size=3 face="Roman"> </font><font size=2 face="sans-serif"><br>
<br>
Carlos</font><font size=3 face="Roman"> <br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net</font><font size=3 color=blue face="Roman"><u><br>
</u></font><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target=_blank><font size=3 color=blue face="Roman"><u>https://puck.nether.net/mailman/listinfo/cisco-voip</u></font></a><font size=3 face="Roman">
<br>
<br>
</font><font size=3 color=blue face="Roman"><u><br>
</u></font><a href="http://us.rd.yahoo.com/evt=49678/*http://smallbusiness.yahoo.com/domains/?p=BESTDEAL" target=_blank><font size=3 color=blue face="Roman"><u>Get
your own web address.</u></font></a><font size=3 face="Roman"><br>
Have a HUGE year through </font><a href="http://us.rd.yahoo.com/evt=49678/*http://smallbusiness.yahoo.com/domains/?p=BESTDEAL" target=_blank><font size=3 color=blue face="Roman"><u>Yahoo!
Small Business.</u></font></a><font size=2 face="Roman">_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net</font><font size=2 color=blue face="Roman"><u><br>
</u></font><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target=_blank><font size=2 color=blue face="Roman"><u>https://puck.nether.net/mailman/listinfo/cisco-voip</u></font></a><font size=3 face="Roman"><br>
</font>
<br>
<br><font size=3><br>
</font>
<hr><font size=3>No need to miss a message. </font><a href="http://us.rd.yahoo.com/evt=43910/*http://mobile.yahoo.com/mail"><font size=3 color=blue><u>Get
email on-the-go </u></font></a><font size=3><br>
with Yahoo! Mail for Mobile. </font><a href="http://us.rd.yahoo.com/evt=43910/*http://mobile.yahoo.com/mail"><font size=3 color=blue><u>Get
started.</u></font></a>
<br>