on the port in CCM you need to tell it what DN it is supposed to be or ring. I think it is called Attendant DN<br><br>Craig<br><br><div><span class="gmail_quote">On 3/14/07, <b class="gmail_sendername">Brian E. Wyland</b>
<<a href="mailto:BWyland@netrixllc.com">BWyland@netrixllc.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">We added a 1760 with a 2 port FXO to accept inbound calls and route via
<br>CCM.<br><br>I had put in the Connection Plar command but since we are configuring it<br>via MGCP it doesn't matter.<br><br>I assume this is something simple, but I am missing it.<br><br>BTW the port configuration on the Gateway has a calling search space
<br>that can see everything.<br><br>You call the number and the FXO picks up and then you get a Dialtone<br>from the CCM.<br><br>Here is the port related configuring the FXO:<br><br>voice-port 3/1<br> supervisory disconnect anytone
<br> signal groundStart<br> no vad<br> no comfort-noise<br> timing hookflash-out 500<br><br>dial-peer voice 99931 pots<br> service mgcpapp<br> port 3/1<br><br>What am I missing? I have been suck in PRI land too long.<br>
<br><br>-- Brian Wyland<br><br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></blockquote></div><br><br clear="all"><br>-- <br>Craig Staffin<br><a href="mailto:Craig@staffin.org">Craig@staffin.org</a><br>(H) 262-437-7313<br>(C) 262-613-6003