You can centralize your gatekeeper, I would divide the zones so that each cluster gets admission for the bandwidth it is requesting... the problem, of course, is that zone bandwidth end-to-end will be denied...<br><br>You also need to modify the BRQ Enabled service parameter in CCM to True to ensure it can dynamically change bandwidth...
<br><br><br><br>Jonathan<br><br><br><br><div><span class="gmail_quote">On 3/14/07, <b class="gmail_sendername">Patrick Mowry</b> &lt;<a href="mailto:pmowry@getgds.com">pmowry@getgds.com</a>&gt; wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
I assume I need a gatekeeper for each cluster.&nbsp;&nbsp;But I have a problem with units.&nbsp;&nbsp;CallManager is asking for 64K for a g711 call, but Polycom is asking for 768K for a 384K video call.<br><br>Would I use via zones help with CAC?
<br><br>Should I have a gatekeeper at each hub and subhub location?<br><br>Thanks for the help,<br><br>-Patrick<br><br>________________________________________<br>From: Jonathan Charles [mailto:<a href="mailto:jonvoip@gmail.com">
jonvoip@gmail.com</a>]<br>Sent: Wednesday, March 14, 2007 7:38 PM<br>To: Patrick Mowry<br>Cc: <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>Subject: Re: [cisco-voip] Voice and Video CallAdmission Control
<br><br>You need a Gatekeeper... Have all of the endpoints point to it and use the GK for CAC.<br><br>Also, build a GK-controlled trunk from each CCM node to the GK so CCM can call the H.323 nodes... also build a route-pattern on CCM to point to the aforementioned trunk...
<br><br><br><br><br>Jonathan<br>On 3/14/07, Patrick Mowry &lt;<a href="mailto:pmowry@getgds.com">pmowry@getgds.com</a>&gt; wrote:<br>Anyone integrating VTA and H323 video endpoints with CallManager 4.1(3)?<br>I&#39;m looking for advise on Call Admission 
Control.Almost all sites are<br>point to point T1 circuts, but not hub and spoke.I have 2 main hubs<br>with a CallManger cluster at each, but then there are sub-hubs (with 1<br>to 3 sites behind them) with no CallManager or local gatekeeper.
<br><br>So is anyone dealing with call admission control in a wetup like this?<br>It was easy with polycom endpoints and an IPVC MCU, but VT Advantage<br>units are poping up everywhere.<br><br>Thanks,,<br><br>-Patrick<br>
<br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br></blockquote></div><br>