I have run the VG224 in mixed mode... and it works fine...<br><br>Just leave the H.323 ports unconfigured in CCM, and configure H.323 dial-peers on the 224.<br><br><br><br>Jonathan<br><br><div><span class="gmail_quote">On 3/22/07,
<b class="gmail_sendername">Kalle Tetto</b> <<a href="mailto:tettokalle@hotmail.com">tettokalle@hotmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi all,<br><br>I have an VG224 with modem, faxes and analog phones. As far as I can see<br> now, the only way to configure the VG224 is SCCP mode, because I will<br>have to use forward, pickup and transfer.<br><br>For the modem and fax ports, should I now configure SCCP or H323.
<br><br>What are your experiences with SCCP and modems, FAX?<br><br>If I configure the ports of the VG224 which will be connected to fax and<br>modems using H323, i can use modem and fax passthrough. what would the<br>configuration looks like?
<br><br>Do I have to register the the VG224 as H323 gateway and SCCP gateway?<br><br>I know, alot of question, but hopefully you have more experience in<br>VG224 than me.<br><br>Cheers<br>Christian<br><br>_______________________________________________
<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip
</a><br></blockquote></div><br>