What actually my client want from me is that remote site Phones should be registered with Call Manager Cluster but calls coming on the PRI should be handled locally and no rtp stream should be created. Does SRST or unity express at remote site can act as IVR or autoattandant even when the phones are registered with Call manager Cluster.
<br><br><br><div><span class="gmail_quote">On 4/3/07, <b class="gmail_sendername">zohaib shabir</b> <<a href="mailto:zohaibshabir@gmail.com">zohaibshabir@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>Thanyou Eirck and Jonathan<br><br>Does there exits anyway that calls can be handled locally not routed to CCM because the bandwidth here is pretty expensive and have to calculate the bandwidth of all incoming calls from remote site to central site. Tell me that it is possible that unity express can do it for me.
<div><span class="e" id="q_111b8720669d23ea_1"><br><div><span class="gmail_quote">On 4/3/07, <b class="gmail_sendername">Erick Bergquist</b> <<a href="mailto:erickbe@yahoo.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
erickbe@yahoo.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;"><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;">When the site isn't in SRST fallback mode, the inbound calls should be routed to Call Manager to be handled. If
H.323, with dial-peers and if MGCP then the gateway and PRI endpoint will be registered to Call Manager and controlled by Call Manager itself when not in SRST mode and MGCP connection is active and registered. <br><br>If the gateway is MGCP, you will need to configure the ccm-manager for fallback-mgcp so the voice-ports on the router (PRI, etc) fallback to H323 mode when MGCP connection fails. SRST and MGCP fallback are two seperate items.
<br><br>In SRST Fallback (H323 also), you should have a pots dial-peer for the PRI with direct-inward-dial on it and then inbound calls will go to IP Phones registered to router in
SRST mode. You may need to configure alias and/or translation rules if you have calls going to logical numbers (hunt groups, AAs, etc) so those numbers go to a real IP phone while router is in SRST mode.<br><br>HTH, Erick
<span><br><br><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;">----- Original Message ----<br>From: zohaib shabir <<a href="mailto:zohaibshabir@gmail.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
zohaibshabir@gmail.com</a>><br>To: <a href="mailto:cisco-voip@puck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voip@puck.nether.net</a><br>Sent: Tuesday, April 3, 2007 11:56:27 AM
<br>Subject: [cisco-voip] SRST with Call manager 5.0<br><br>Dear All,<br><br>I have scenario where one side has call manager 5.0
cluster and the remote site has SRST enabled router with PRI line
terminating on it.My question does SRST will be able handle all the PRI
calls coming in locally or handled by call manager remotely.
<br clear="all"><br>-- <br>Regards,<br>Zohaib Shabir<br>Network Engineer(Voice and Presales)<br>DWP Group, TECH Division<br>Ph:+92-302-8232689
<div>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">cisco-voip@puck.nether.net
</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></div></div><br></span>
</div></div><span><br>
<hr size="1"><a href="http://us.rd.yahoo.com/evt=49938/*http://tools.search.yahoo.com/toolbar/features/mail/" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">Never miss an email again!<br>Yahoo! Toolbar
</a> alerts you the instant new Mail arrives.<a> Check it out.</a></span></div></blockquote></div><br><br clear="all"><br>-- <br>Regards,<br>Zohaib Shabir<br>Network Engineer(Voice and Presales)<br>DWP Group, TECH Division
<br>Ph:+92-302-8232689
</span></div></blockquote></div><br><br clear="all"><br>-- <br>Regards,<br>Zohaib Shabir<br>Network Engineer(Voice and Presales)<br>DWP Group, TECH Division<br>Ph:+92-302-8232689