<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-7" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<tt>I managed to upgrade to the correct license file and so it worked
without continuously rebooting!!<br>
I hadn't figured out that from all software versions that are listed
there, the most important regarding the <br>
listening was the version of the voice mail!!<br>
So i uploaded a 2.3.3 license for AIM and it worked!!<br>
All 4 CTI ports are configured at the CCM, route points and jtapi user
etc.<br>
<br>
<b>One question only:</b> <br>
All the menu of CCM regarding Voice Mail (voice mail port, the wizard,
MWIs, VM route point and VM profile) is it working with CUE or it
supposed to be used only with cisco Unity?<br>
If so, how can i setup MWI on CUE then?<br>
<br>
Thanks<br>
Anthony<br>
</tt><br>
Erick Bergquist wrote:
<blockquote cite="mid117638.90416.qm@web37204.mail.mud.yahoo.com"
type="cite">
<style type="text/css"><!-- DIV {margin:0px;} --></style>
<div
style="font-family: times new roman,new york,times,serif; font-size: 12pt;">
<div
style="font-family: times new roman,new york,times,serif; font-size: 12pt;">Post
the error messages, console messages, etc from timeframe it
reboots (if any). I've worked on many failed AIM-CUEs but haven't seen
this sort of thing on a new one yet. <br>
<br>
If you have a few seconds before it reboots, you can try to enter 'show
log name messages.log tail 5' and then wait and capture new messages
that may happen when it reboots.<br>
<br>
Like Kris had said, the boot helper
image disk-cleanup may help, but sometimes it doesn't (depends on how
bad
flash is). <br>
<br>
Hope this helps figure it out, else TAC it. <br>
<br>
<div
style="font-family: times new roman,new york,times,serif; font-size: 12pt;">-----
Original Message ----<br>
From: Anthony Kouloglou <a class="moz-txt-link-rfc2396E" href="mailto:akoul@dataways.gr"><akoul@dataways.gr></a><br>
To: Kris Seraphine <a class="moz-txt-link-rfc2396E" href="mailto:baryonyx5@gmail.com"><baryonyx5@gmail.com></a><br>
Cc: <a class="moz-txt-link-rfc2396E" href="mailto:cisco-voip@puck-nether.net">"cisco-voip@puck-nether.net"</a> <a class="moz-txt-link-rfc2396E" href="mailto:cisco-voip@puck.nether.net"><cisco-voip@puck.nether.net></a><br>
Sent: Friday, March 30, 2007 9:16:09 AM<br>
Subject: Re: [cisco-voip] CUE-AIM 2.3-CCM:after running the wizard it
continously reloads<br>
<br>
<tt>Yes Kris,<br>
it is a band new AIM module with 1GB flash. Do you think it is normal
that after i do a minimal config it gets stuck?<br>
Shall i proceed with what you sent me?<br>
<br>
Thanks<br>
Anthony<br>
</tt><br>
Kris Seraphine wrote:
<blockquote type="cite">Is it a brand new AIM module? I've seen them
get stuck in
a reboot cycle when the flash disk gets too full. The solution to that
is to download the helper image from CCO and put it on tftp. Go to
bootloader prompt (hit *** when prompted during boot) and change config
to point to this helper. Boot this image by doing a "boot helper".
When the image boots up, choose Option 3 to do disk cleanup. <br>
<br>
That might be worth a try.<br>
<br>
<br>
It might also help to post an error messages you see when it's stuck in
the reboot cycle. <br>
<br>
<br>
<br>
<div><span class="gmail_quote">On 3/30/07, <b
class="gmail_sendername">
Anthony Kouloglou</b> <<a rel="nofollow" target="_blank"
href="mailto:akoul@dataways.gr">akoul@dataways.gr</a>>
wrote:</span>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi,
i have a CUE AIM 2.3 on a 2811 and i integrated it with a CCM 5.0(4a).<br>
After running the 1 wizard to configure it, i also run the<br>
postinstallation wizard: it went OK.<br>
Then i accessed the GUI and performed the wizard to import users etc. <br>
i have filled the necessary information, jtapi user, ccmadmin user and<br>
the wizard imported all the settings correctly (i have skipped the users<br>
import because for the moment i only need the AA).<br>
After that, i saw the gui and the CTI ports were correctly imported,
but... <br>
<br>
it started to reload!<br>
And after it came online, it reloaded again!<br>
And every time it came online, after 10-15 seconds it reloads.<br>
I almost had the time to issue "offline" and "restore factory defaults"
<br>
and after the reload i am back to zero again.<br>
I did the same procedure and it happened again!!<br>
Any ideas why it is happening?<br>
<br>
Thanks<br>
Anthony<br>
_______________________________________________<br>
cisco-voip mailing list <br>
<a rel="nofollow" target="_blank"
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a rel="nofollow" target="_blank"
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote>
</div>
<br>
<br clear="all">
<br>
-- <br>
kris seraphine
</blockquote>
<div>_______________________________________________<br>
cisco-voip mailing list<br>
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a target="_blank"
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</div>
</div>
<br>
</div>
</div>
<br>
<hr size="1">The fish are biting.<br>
<a
href="http://us.rd.yahoo.com/evt=49679/*http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php?o=US2140&cmp=Yahoo&ctv=Q107Tagline&s=Y&s2=EM&b=50">
Get more visitors</a> on your site using <a
href="http://us.rd.yahoo.com/evt=49679/*http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php?o=US2140&cmp=Yahoo&ctv=Q107Tagline&s=Y&s2=EM&b=50">Yahoo!
Search Marketing.</a></blockquote>
</body>
</html>