Well, the easiest thing to do is to put x1212 on all three phones as a shared line.<br><br>However, let's do what you mentioned.<br><br>Create a line group, add those three numbers to it.<br><br>Create a Hunt List, add the line group to it.
<br><br>Create a hunt pilot, give it x1212 and point it at the HL you created above.<br><br>Reset stuff.<br><br>Done.<br><br>Remember, if the gateway is under the control of CCM (or is H.323 with a voip dial-peer pointing at CCM), the only thing you need to do is match the digits you are receiving from telco to a DN/HP/TP/RPat/RPoint on CCM.
<br><br><br>Jonathan<br><br><div><span class="gmail_quote">On 4/6/07, <b class="gmail_sendername">Todd Franklin</b> <<a href="mailto:toddnh65@gmail.com">toddnh65@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
I posted a start on this a while back, and your answers were helpful! But I think I am stuck!<br><br>I have a PRI line. We have a flat network that interconnects 4 buildings with one CCM and Unity box running the show.<br>
<br>So someone calls in, 555-1212. I have my telco ready to move 1212 to the PRI, so I should be able to tell CCM to grab that<br>pretty easy. When 1212 comes in, I want to ring extensions 3200, 2301, and 3202. I think this is where I am stuck.
<br><br>Do I setup a Line Group? A Hunt List? Where do I go from here? <br><br>Thanks.<br><span class="sg"><br>Todd<br>
</span><br>_______________________________________________<br>cisco-voip mailing list<br><a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a onclick="return top.js.OpenExtLink(window,event,this)" href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br></blockquote></div><br>