<DIV> Make sure you use the "Array" checkbox if you're using a Microsoft DHCP server. I'm not sure about Windows 2003 server, but I know this is how it works in W2K SVR.</DIV>
<DIV> </DIV>
<DIV>Dennis Hartmann</DIV>
<DIV>White Pine Communications</DIV>
<DIV><BR><BR>----- Original Message -----<BR>From: Robert Kulagowski <BOB@SMALLTIME.COM><BR>Date: Sunday, April 22, 2007 2:52 pm<BR>Subject: Re: [cisco-voip] TFTP Server 1 and TFTP Server 2 ?<BR>To: Cisco Voip <CISCO-VOIP@PUCK.NETHER.NET><BR><BR>> Zevier Thoran wrote:<BR>> > Hi,<BR>> > How can I have my IOS DHCP Server dish out two numbers of <BR>> TFTP Server <BR>> > IP Addresses to my IP Phones - one for the Pub and the other <BR>> for the Sub.<BR>> > Thanks - Zevier.<BR>> <BR>> Just put them one after another<BR>> <BR>> option 150 ip 1.1.1.1 2.2.2.2<BR>> <BR>> _______________________________________________<BR>> cisco-voip mailing list<BR>> cisco-voip@puck.nether.net<BR>> https://puck.nether.net/mailman/listinfo/cisco-voip<BR>> </DIV>