<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML DIR=ltr><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"></HEAD><BODY><DIV><FONT face='Arial' color=#000000 size=2>I have a CCM 4.3(1) with a 2821 running 12.4(11)T MGCP
controlled. There are 3 PRI's coming into the system and 12 FXS ports tied
to Caparis RightFax Server 9.X. </FONT></DIV>
<DIV><FONT face=Arial size=2>Calls come into CCM just fine and all call routing
works even to the RightFax server through RL-->RG configuration that I have
route patterns pointing to from within CCM.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Call Flow goes
PSTN-->2821-MGCP(PRI)-->CCM(4.3(1))-->2821-MGCP(FXS
Ports)-->Caparis-RightFax.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The faxes are getting to the server, however it is
placing them in a default account because there is no DTMF being passed to it
according to running the card in debug mode. So no ANI nor
DNIS.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I was thinking of going to H323 to make this work
if needed but would like to stick with MGCP if possible.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Should I switch the "MGCP" command from dtmf out of
band to other parameters</FONT></DIV>
<DIV><FONT face=Arial size=2>or</FONT></DIV>
<DIV><FONT face=Arial size=2>Will I have to enable Fax-Relay and not passthrough
to get this to see the DTMF digits ANI/DNIS?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Brian</FONT></DIV></BODY></HTML>