<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML DIR=ltr><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"></HEAD><BODY><DIV><FONT face='Arial' color=#000000 size=2>I have a CCM 4.3(1) with 2821 VGW 12.4(11)T1 running in
H323 mode.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Testing:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Using LAN Line</FONT></DIV>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>I can call into VGW and receive ring tone on call
setup/proceed.</FONT></DIV>
<DIV> </DIV></FONT></DIV>
<DIV><FONT face=Arial size=2>Using 7961 8.2(2)sr1</FONT></DIV>
<DIV><FONT face=Arial size=2>I can call out but certain numbers I call do not
connect and get, and also do not get ring indicator</FONT></DIV>
<DIV>call_progress: DEV_CONNECTED VOICE ERROR: Bearer capability not
available(0x3A): b channel 2 call id 0x50D</DIV>
<DIV> </DIV>
<DIV>IP Communicator 2.1(1)</DIV>
<DIV>Can call anywhere and receive ring indicator as well as get connected to
calls that I cannot through regular hard phones.</DIV>
<DIV> </DIV>
<DIV>I have added the progress_ind setup/connect/progress commands under the
pots dial-peers to correct the ring back issue but to no avail.</DIV>
<DIV> </DIV>
<DIV>I do not have Display IE checked and I am not running fast-start for
inbound nor outbound.</DIV>
<DIV> </DIV>
<DIV>DSP's are in flex mode and the firmware is 9.2.2 I do believe.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Very weird stuff when I can call everywhere with IPC but not a hard phone
and the funny thing is that sometimes I can call it.</DIV>
<DIV> </DIV>
<DIV>Brian</DIV></BODY></HTML>