<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3086" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Wouldn't you do this with the dial-peers?</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>There is a caller ID config statement that you can configure,
then select the appropriate port.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT
size=2>--------------------------------------------------------------------------------<BR>Lelio
Fulgenzi, B.A.<BR>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1<BR>(519) 824-4120 x56354 (519) 767-1060 FAX
(JNHN)<BR>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
<BR>"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo
buffalo." WJR<BR></FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=CarlosOrtiz@bayviewfinancial.com
href="mailto:CarlosOrtiz@bayviewfinancial.com">CarlosOrtiz@bayviewfinancial.com</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, June 06, 2007 2:24
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] H.323 Gateway PRI
selection</DIV>
<DIV><BR></DIV><BR><FONT face=sans-serif size=2>We have a new H.323 Gateway
that will have 4 PRI's. 2 PRI's will be grouped together and present one
caller ID. Each of the remaining 2 PRI's will have their own
caller ID (3 total different Caller ID's). How can you select a specific
PRI to be used so that the correct caller ID is shown depending on which phone
dials outboud? I should be able to prepend a digit on Call Mgr to the 3
different route patterns (different partitions) and then route the call based
on the leading digit found on the H.323 GW. I know I can do this via
MGCP easily as well. Any other good ideas or thoughts about this via
H.323?</FONT> <BR><BR><FONT face=sans-serif size=2>Carlos</FONT>
<P>
<HR>
<P></P>_______________________________________________<BR>cisco-voip mailing
list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE></BODY></HTML>