<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Yep. must have d-ch up to be registered. Also watch out for CSCsj38342
GW gets unregistered when Device pool is reset and TFTP server is down<br>
and CSCsj45887 Download Failed counter in show ccm-manager does not
increment<br>
<br>
/Wes<br>
<br>
Scott Voll wrote:
<blockquote
cite="midf84a38d30708010850u7a879f08i8716b926e6a6b22a@mail.gmail.com"
type="cite">
<div>I have a 3845 running 12.4(15)T1 via MGCP to the CM 5.1.2.</div>
<div> </div>
<div>on the VGW a show ccm shows registered but on the CM is shows
the correct IP address but unregistered.</div>
<div> </div>
<div>I have the service MGCPapp command on my dial-peers and all the
normal ccm-manager commands along with MGCP commands.</div>
<div> </div>
<div>is it not registered because I don't have anything plugged into
the PRI ports?</div>
<div> </div>
<div>TIA</div>
<div> </div>
<div>Scott</div>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
</body>
</html>