<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3132" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I believe all layers have to be up before it will
show registered on CallManager. But it will show connected to CallManager
subscribers in the show ccm on the router as long as data connectivity from the
router to the subscribers is available.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>That is what I experienced.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>You can try a cross-over cable between two local
ports to simulate SP connectivity or a loopback might work as well.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2><A
href="http://www.ciscohq.com/FAQs/Cisco-FAQs/Building-T1-Looback-and-Crossover-Cable.html">http://www.ciscohq.com/FAQs/Cisco-FAQs/Building-T1-Looback-and-Crossover-Cable.html</A></FONT></DIV>
<DIV>--------------------------------------------------------------------------------<BR>Lelio
Fulgenzi, B.A.<BR>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1<BR>(519) 824-4120 x56354 (519) 767-1060 FAX
(JNHN)<BR>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
<BR>"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo
buffalo." WJR</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=svoll.voip@gmail.com href="mailto:svoll.voip@gmail.com">Scott
Voll</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, August 01, 2007 11:50
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] VGW not registered
in CCM but is on GW</DIV>
<DIV><BR></DIV>
<DIV>I have a 3845 running 12.4(15)T1 via MGCP to the CM 5.1.2.</DIV>
<DIV> </DIV>
<DIV>on the VGW a show ccm shows registered but on the CM is shows the correct
IP address but unregistered.</DIV>
<DIV> </DIV>
<DIV>I have the service MGCPapp command on my dial-peers and all the
normal ccm-manager commands along with MGCP commands.</DIV>
<DIV> </DIV>
<DIV>is it not registered because I don't have anything plugged into the PRI
ports?</DIV>
<DIV> </DIV>
<DIV>TIA</DIV>
<DIV> </DIV>
<DIV>Scott</DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>cisco-voip mailing
list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE></BODY></HTML>