<br><font size=2 face="sans-serif">I am looking to accomplish the following
with SRST. </font>
<br>
<br><font size=2 face="sans-serif">In SRST I want 2 DID's that route to
2 different hunt groups (2 business units same location). If the
call is not answered then I want to CFWD each DID to it's own external
number. One per business unit.</font>
<br>
<br><font size=2 face="sans-serif">I thought this could be done with the
alias command but upon reading further it appears that an alias is only
valid with locally REGISTERED numbers on the gateway. Config was
going to be something like this:</font>
<br>
<p><font size=1 color=#000080 face="Tahoma"><b>alias 1 4700 to 4701 preference
1<br>
alias 2 4700 to 4702 preference 2<br>
alias 3 4700 to 4703 preference 3<br>
alias 4 4700 to 4704 preference 4<br>
alias 5 4700 to 9XXXXXXXXXX preference 5 </b></font><font size=1 face="Tahoma"><b>---
</b></font><font size=1 color=red face="Tahoma"><b>Want to send this to
PSTN</b></font><font size=1 color=#000080 face="Tahoma"><b><br>
<br>
alias 15 4749 to 4745 preference 1<br>
alias 16 4749 to 4744 preference 2<br>
alias 17 4749 to 4740 preference 3<br>
alias 18 4749 to 9XXXXXXXXXX preference 4 --- </b></font><font size=1 color=red face="Tahoma"><b>Want
to send this to the PSTN</b></font><font size=1 color=#000080 face="Tahoma"><b><br>
<br>
call-forward busy 9XXXXXXXXXX<br>
call-forward noan 9XXXXXXXXXX timeout 16</b></font>
<p>
<br><font size=2 face="sans-serif">I believe the CFWD busy or CFWD noan
can be to the PSTN but in this case I need specific calls to go to different
PSTN destinations. Any help would be appreciated.</font>
<br>
<br><font size=2 face="sans-serif">Carlos</font>