<br><font size=2 face="sans-serif">Quick update on this. I ended
up deploying the broadcast line group per your reasons/suggestion below.
The one drawback here was adding a line to each phone (they wanted
it separate from their main line). I tried using BAT to ADD LINES
but couldn't get the upload to work. </font>
<br>
<br><font size=2 face="sans-serif">All these phones had a line 1 and I
wanted to add line 2(Broadcast Line). </font>
<br><font size=2 face="sans-serif"> </font>
<br><font size=2 face="sans-serif">1)I tried just adding Line 1 but it
would say it already exists. </font>
<br><font size=2 face="sans-serif">2) Then I tried supllying all the line
one information as required and adding line 2 and that wouldn't work.</font>
<br><font size=2 face="sans-serif">3) I tried removing all of line 1 info
and only having line 2 info but the exported BAT would only have the MAC
and nothing else.</font>
<br>
<br><font size=2 face="sans-serif">Anyone done ADD LINES to existing phones
before? What's the trick?</font>
<br>
<br><font size=2 face="sans-serif">Carlos</font>
<br>
<br>
<br>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>Wes Sisk <wsisk@cisco.com></b>
</font>
<br><font size=1 face="sans-serif">Sent by: cisco-voip-bounces@puck.nether.net</font>
<p><font size=1 face="sans-serif">09/04/2007 04:26 PM</font>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td><font size=1 face="sans-serif">Robert Singleton <rsingleton@morsco.com></font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td><font size=1 face="sans-serif">Voip List <cisco-voip@puck.nether.net></font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">Re: [cisco-voip] Shared Line phone Limit</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=3>A broadcast line group would cover that just as well without
the shared line processing dependencies & race conditions.<br>
<br>
/Wes<br>
<br>
Robert Singleton wrote: </font>
<br><font size=3><tt>On Tue, 2007-09-04 at 09:27 -0400, Wes Sisk wrote:<br>
</tt></font>
<br><font size=3><tt>testing goes beyond that, but is it really a good
idea? try to avoid<br>
having a single line shared in that many places if possible. testing<br>
does not include cluster over wan, device reset recovery, etc.<br>
<br>
<br>
/Wes<br>
<br>
On Aug 31, 2007, at 11:22 AM, </tt></font><a href=mailto:CarlosOrtiz@bayviewfinancial.com><font size=3 color=blue><tt><u>CarlosOrtiz@bayviewfinancial.com</u></tt></font></a><font size=3><tt>
wrote:<br>
<br>
<br>
Is their a limit on how many phones can share a line? I have seen
it<br>
set as high as 30 but had a request for about 60. <br>
</tt></font>
<br><font size=3><tt><br>
I have a situation here with 60 appearances of a shared line. We have a<br>
call box at the front door. The DN it is programmed to dial is on 60 out<br>
of 78 devices. It gets fairly heavy use between 5:30 and 6:30 each<br>
morning as people who don't have a key arrive early for work. It's also<br>
handy for after hours courier pickup or food delivery, which are amongst<br>
my favorite uses for it. :)<br>
<br>
Robert<br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
</tt></font><a href="mailto:cisco-voip@puck.nether.net"><font size=3 color=blue><tt><u>cisco-voip@puck.nether.net</u></tt></font></a><font size=3><tt><br>
</tt></font><a href="https://puck.nether.net/mailman/listinfo/cisco-voip"><font size=3 color=blue><tt><u>https://puck.nether.net/mailman/listinfo/cisco-voip</u></tt></font></a><font size=3><tt><br>
</tt></font><font size=2><tt>_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
https://puck.nether.net/mailman/listinfo/cisco-voip</tt></font>
<br>