<div>setup a single switch then.</div>
<div> </div>
<div>You want it to poll the switches and CM because if the phone moves you want it to use the correct ELIN. Device pools and locations are static and if you don't change it then they would have the wrong location.</div>
<div> </div>
<div>you can set phones on a per port bases on the switches for testing purposes.</div>
<div> </div>
<div>once you have this setup with Telco, your going to want to move pretty quickly at getting everyone setup so other 911 calls don't go out with out locations / ELINS.</div>
<div> </div>
<div>Scott<br><br> </div>
<div><span class="gmail_quote">On 9/17/07, <b class="gmail_sendername">Dark Fiber</b> <<a href="mailto:d4rkf1ber@gmail.com">d4rkf1ber@gmail.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Is there a way to test that what I setup is working? I have not setup<br>any switches yet. I am starting to think CER doesn't work exactly as
<br>I thought it might. Seems to be very dependent on polling switches<br>and Callmanager.<br><br>I was kinda hoping I would be able to also use things like device<br>pools or locations, or even setup a phone manually for testing that
<br>every thing was working prior to having to discover everything through<br>SNMP.<br><br>Gotta keep reading and hopefully I can figure out a way to do my test.<br><br>I want to setup one ERL, and one phone in that ERL manually so I can
<br>test that things are setup right and the 911 call goes to the right<br>PRI and gets adjusted accordingly and hits the right PSAP and they see<br>the right info and such. Then I would call back into that number and<br>
see that I reach the phone I called from.<br><br>Has to be a way I am sure, just a matter of reading ahead and not<br>following exactly what they say in the guide I guess.<br><br><br><br>On 9/17/07, Scott Voll <<a href="mailto:svoll.voip@gmail.com">
svoll.voip@gmail.com</a>> wrote:<br>> CTI manager is a service on you CM servers. look under your services and<br>> make sure it's running.<br>><br>> I'm using the Publisher as my primary as it has the CM database then using
<br>> the Subscriber as a secondary because it has the copy of the database. if<br>> I'm wrong in my thinking...... please let me know.<br>><br>> Scott<br>><br>><br>> On 9/17/07, Dark Fiber <<a href="mailto:d4rkf1ber@gmail.com">
d4rkf1ber@gmail.com</a>> wrote:<br>> ><br>> > Ok, I have now moved on to configuring the CER server itself.<br>> ><br>> > I am on pg. 5-16 of the CER Admin Guide 1.3(1) setting up the Cisco<br>> > Unified CallManager Details portion.
<br>> ><br>> > My callmanager cluster consists of a primary and subscriber. Most<br>> > phones tend to register with the subscriber first.<br>> ><br>> > Since this portion is about connecting to callmanager to get phone
<br>> > info, I would think the subscriber would be the better choice to<br>> > connect to as it is likely to have more phones registered to it at any<br>> > given time.<br>> ><br>> > However because of that I am wondering if from a load / performance
<br>> > stand point would it be better to connect to the publisher rather then<br>> > the server all the phones would be registered to.<br>> ><br>> > I don't know enough about this to know for certain so I may be way off.
<br>> ><br>> > Also what about CTI Manager? Thats my callmanager servers right? I<br>> > guess that maybe in some large callmanager deployments one could<br>> > designate some servers just for cti management maybe so its listed
<br>> > like this? But if all you have is a publisher and subscriber<br>> > callmanager that do everything then those would be your cti managers?<br>> > _______________________________________________<br>
> > cisco-voip mailing list<br>> > <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>> > <a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip
</a><br>> ><br>><br>><br></blockquote></div><br>