<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Any insight on the h.323 signaling polycom sends when it goes onhook?<br>
<br>
/Wes<br>
<br>
<br>
Dave Wolgast wrote:
<blockquote
cite="mid:e4491a9c0709200853p5dc5880fl152790da8b0f407d@mail.gmail.com"
type="cite">
<div>Hello,</div>
<div> </div>
<div>I have a Polycom VSX8000 connecting with a skinny IP phone via
gatekeeper-controlled H.323 trunk (Gatekeeper is Polycom SE200 -- Not
IOS). Calls are connected successfully in both directions using our
4-digit dial plan. However, when the Polycom H.323 VSX endpoint is the
first to hang up the call, the skinny phone gets reorder tone rather
than disconnecting. The display on the IP phone continues to say
'connected.'</div>
<div> </div>
<div>At first glance, it seems as if there is never a disconnect
message sent from the H.323 side of the call. (We are also
experiencing a similar issue with an H.323 IVR that is defined as an
H.323 gateway).</div>
<div> </div>
<div>Can anyone make any suggestions as to what is going on here, and
how I should proceed?</div>
<div> </div>
<div>Thanks!<br clear="all">
<br>
-- <br>
Dave Wolgast</div>
<div>Inergex, Inc.<br>
Buffalo, New York</div>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a></pre>
</blockquote>
</body>
</html>