<div>Hey guys, my IOS doesnt support SCCP for FXS ports (12.4(3g)). So I did this to make it work:</div> <div> </div> <div>First, I downloaded the following TCL script <BR> app-h450-transfer.2.0.0.9.zip<BR>from<BR> <A href="http://www.cisco.com/pcgi-bin/tablebuild.pl/ip-iostsp">http://www.cisco.com/pcgi-bin/tablebuild.pl/ip-iostsp</A><BR></div> <div>Then added the following configuration</div> <div> </div> <div>!</div> <div>voice service voip <BR> allow-connections h323 to h323 <BR> h323 </div> <div>!</div> <div>voice class h323 1 <BR> h225 timeout tcp establish 3 </div> <div>!</div> <div>application <BR> service transfer_app flash:app-h450-transfer.2.0.0.9.tcl <BR> paramspace english language en <BR> paramspace english index 1 <BR> paramspace english location
flash:prompts/en <BR> paramspace english prefix en </div> <div>tftp-server flash:prompts/en/en_music_xferee_ulaw.au <BR>tftp-server flash:prompts/en/en_author_fail_ulaw.au <BR>tftp-server flash:prompts/en/en_busy_tone_ulaw.au <BR>tftp-server flash:prompts/en/en_dest_blocked_ulaw.au <BR>tftp-server flash:prompts/en/en_dest_busy_ulaw.au <BR>tftp-server flash:prompts/en/en_disconnected_ulaw.au <BR>tftp-server flash:prompts/en/en_enter_dest_ulaw.au <BR>tftp-server flash:prompts/en/en_fast_busy_tone_ulaw.au <BR>tftp-server flash:prompts/en/en_music_xferto_ulaw.au <BR>tftp-server flash:prompts/en/en_no_dest_entered_ulaw.au <BR>tftp-server flash:prompts/en/en_no_service_available_ulaw.au <BR>tftp-server flash:prompts/en/en_operator_is_busy_ulaw.au <BR>tftp-server flash:prompts/en/en_reenter_dest_ulaw.au <BR>tftp-server flash:prompts/en/en_ringback_tone_ulaw.au </div> <div>!</div> <div>dial-peer voice 10 pots <BR> service transfer_app <BR> destination-pattern
50001 <BR> port 0/1/0 <BR>! <BR>dial-peer voice 20 pots <BR> service transfer_app <BR> destination-pattern 50002 <BR> port 0/1/1 <BR>! <BR>dial-peer voice 1 voip <BR> preference 1 <BR> service transfer_app <BR> destination-pattern 1... <BR> session target ipv4:x.x.x.x <BR> dtmf-relay h245-alphanumeric <BR> codec g729r8 bytes 40 <BR> ip qos dscp cs3 media <BR> ip qos dscp cs3 signaling <BR>! <BR>dial-peer voice 4 voip <BR> preference 2 <BR> service transfer_app <BR> destination-pattern 1... <BR> session target ipv4:y.y.y.y <BR> dtmf-relay h245-alphanumeric <BR> codec g729r8 bytes 40 <BR> ip qos dscp cs3 media <BR> ip qos dscp cs3 signaling <BR>!</div> <div> </div> <div>Hookflash works now but I think I will try downloading a better IOS later, and will use SCCP to get all the features working.</div> <div> </div>
<div>Thanks for all the replies.</div> <div> <BR><BR><BR><B><I>Lelio Fulgenzi <lelio@uoguelph.ca></I></B> wrote:</div> <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid"> <META content="MSHTML 6.00.2900.3157" name=GENERATOR> <STYLE></STYLE> <DIV><FONT face=Arial size=2>oh great....the various feature modes, one of which is called feature.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>i couldn't get over that the first time i read it. now it makes me laugh.</FONT></DIV> <BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=tednugent73@gmail.com href="mailto:tednugent73@gmail.com">Ted Nugent</A> </DIV> <DIV style="FONT: 10pt
arial"><B>To:</B> <A title=jason.aarons@us.didata.com href="mailto:jason.aarons@us.didata.com">Jason Aarons (US)</A> </DIV> <DIV style="FONT: 10pt arial"><B>Cc:</B> <A title=lelio@uoguelph.ca href="mailto:lelio@uoguelph.ca">Lelio Fulgenzi</A> ; <A title=cisco-voip@puck.nether.net href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, September 21, 2007 12:01 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [cisco-voip] Antw: Analog phones cant transfer calls on2811acting asH323 gw to UCM 4.2 (3)</DIV> <DIV><BR></DIV> <DIV>With Feature codes as you would with an ATA or VG248... check out table 3</DIV> <DIV> </DIV> <DIV><A href="http://www.cisco.com/en/US/products/ps6706/products_feature_guide09186a00806cab75.html#wp1049432">http://www.cisco.com/en/US/products/ps6706/products_feature_guide09186a00806cab75.html#wp1049432</A></DIV> <DIV><BR><BR> </DIV> <DIV><SPAN
class=gmail_quote>On 9/20/07, <B class=gmail_sendername>Jason Aarons (US)</B> <<A href="mailto:jason.aarons@us.didata.com">jason.aarons@us.didata.com</A>> wrote:</SPAN> <BLOCKQUOTE class=gmail_quote style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid"> <DIV lang=EN-US vlink="purple" link="blue"> <DIV> <div><SPAN style="FONT-SIZE: 11pt; COLOR: #1f497d">How are you supposed to transfer a call using an analog phone on a VG224 that is SCCP? Can this be done? I didn't realize it was a feature!</SPAN></div> <div><SPAN style="FONT-SIZE: 11pt; COLOR: #1f497d"></SPAN> </div> <DIV style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: #b5c4df 1pt solid; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 3pt; BORDER-BOTTOM: medium none"> <div><B><SPAN style="FONT-SIZE: 10pt">From:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> <A onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:cisco-voip-bounces@puck.nether.net" target=_blank>cisco-voip-bounces@puck.nether.net </A>[mailto:<A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip-bounces@puck.nether.net" target=_blank>cisco-voip-bounces@puck.nether.net</A>] <B>On Behalf Of </B>Ted Nugent<BR><B>Sent:</B> Thursday, September 20, 2007 11:45 PM<BR><B>To:</B> Lelio Fulgenzi<SPAN class=q><BR><B>Cc:</B> <A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net" target=_blank>cisco-voip@puck.nether.net </A><BR></SPAN><B>Subject:</B> Re: [cisco-voip] Antw: Analog phones cant transfer calls on2811acting asH323 gw to UCM 4.2 (3)</SPAN></div></DIV> <DIV><SPAN class=e id=q_115263724f52af43_3> <div> </div> <DIV> <div>Yep same here and I wondered about that also until i tried to add an ISR FXS SCCP port to CM 4.1... its not an option like in 5.1 for example, I'm guessing thats what they're referring
to...?<BR><BR><BR> </div></DIV> <DIV> <div><SPAN>On 9/20/07, <B>Lelio Fulgenzi</B> <<A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:lelio@uoguelph.ca" target=_blank>lelio@uoguelph.ca</A>> wrote:</SPAN> </div> <DIV> <DIV> <div><SPAN style="FONT-SIZE: 10pt">I think the documentation is misleading...I'm using supplementary services w/ SCCP on the VG224 with CCM 4.1(3) with no problems.</SPAN></div></DIV> <BLOCKQUOTE style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 4pt; PADDING-BOTTOM: 0in; MARGIN: 5pt 0in 5pt 3.75pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"> <DIV> <DIV> <div><SPAN style="FONT-SIZE: 10pt">----- Original Message ----- </SPAN></div></DIV> <DIV> <div style="BACKGROUND: #e4e4e4"><B><SPAN style="FONT-SIZE: 10pt">From:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> <A title=tednugent73@gmail.com onclick="return
top.js.OpenExtLink(window,event,this)" href="mailto:tednugent73@gmail.com" target=_blank>Ted Nugent</A> </SPAN></div></DIV> <DIV> <div><B><SPAN style="FONT-SIZE: 10pt">To:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> <A title=greencucumber2007@yahoo.com onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:greencucumber2007@yahoo.com" target=_blank>Cucumber Green</A> </SPAN></div></DIV> <DIV> <div><B><SPAN style="FONT-SIZE: 10pt">Cc:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> <A title=cisco-voip@puck.nether.net onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net" target=_blank>cisco-voip@puck.nether.net</A> </SPAN></div></DIV> <DIV> <div><B><SPAN style="FONT-SIZE: 10pt">Sent:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> Thursday, September 20, 2007 10:21 PM</SPAN></div></DIV> <DIV> <div><B><SPAN style="FONT-SIZE: 10pt">Subject:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> Re: [cisco-voip] Antw: Analog phones cant transfer
calls on 2811acting asH323 gw to UCM 4.2 (3)</SPAN></div></DIV> <DIV> <div><BR> </div></DIV> <DIV> <div>If you need features with fxs you might want to look into SCCP for FXS controller as you would with a VG224 and h323 for and PSTN/PRI access etc. (see the link you need CM4.2+ and a certain rev of IOS depending on your hardware). </div></DIV> <DIV> <div> </div></DIV> <DIV> <div><A onclick="return top.js.OpenExtLink(window,event,this)" href="http://www.cisco.com/en/US/partner/products/ps6441/products_feature_guide09186a0080483a76.html#wp1304455+" target=_blank>http://www.cisco.com/en/US/partner/products/ps6441/products_feature_guide09186a0080483a76.html#wp1304455 </A></div></DIV> <DIV> <div> </div></DIV> <DIV> <div> </div></DIV> <DIV> <div> </div></DIV> <DIV> <div><BR><BR> </div></DIV> <DIV> <div><SPAN>On 9/20/07, <B>Cucumber Green</B> <<A onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:greencucumber2007@yahoo.com" target=_blank>greencucumber2007@yahoo.com </A>> wrote:</SPAN> </div> <DIV> <div>Hello!</div></DIV> <DIV> <div> </div></DIV> <DIV> <div>Yeah I have tried this without luck, I guess it only works if the H323 gateway has a FXO</div></DIV> <DIV> <div>connection to a PBX<BR><BR><B><I>Robert Schuknecht <<A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:rschuknecht@gmx.de" target=_blank>rschuknecht@gmx.de</A>></I></B> wrote: </div></DIV> <BLOCKQUOTE style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; MARGIN-TOP: 5pt; PADDING-LEFT: 4pt; MARGIN-BOTTOM: 5pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 3.75pt; BORDER-LEFT: #1010ff 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"> <div>Hi Cucumber,<BR><BR>did you try to adjust the the hook-flash timer under the voice-port?<BR>This timer has to equal on the voice-port and the connected telephone.
<BR><BR>/Robert<BR><BR>>>> Cucumber Green schrieb am Donnerstag, 20. </div> <DIV> <div><BR>September 2007 um 17:53 in Nachricht 3ab0adee131ef58c7afb0ea50017a410:<BR>> Analog phones can send and receive calls from IP phones, but<BR>> when pressing the hookflash key at the analog phone, the analog phone does <BR>> not get a dial tone in order to transfer the call :(<BR>> <BR>> Phones are hooked into FXS ports on a 2811 and will use G729 codec.<BR>> <BR>> I have already checked the "Media Termination Point required" check box in <BR>> the gateway configuration at call manager (using unified call manager 4.2(3) <BR>> ). I thought that would do the trick, but it didnt, any ideas?<BR>> <BR>> This is the gateway config (IOS version 12.4(3g) spservicesK9) <BR>> <BR>> !<BR>> version 12.4<BR>> service timestamps debug datetime msec<BR>> service timestamps log datetime msec<BR>> service password-encryption<BR>>
!<BR>> ip subnet-zero<BR>> !<BR>> ! <BR>> ip cef<BR>> !<BR>> !<BR>> no ip domain lookup<BR>> !<BR>> voice-card 0<BR>> no dspfarm<BR>> !<BR>> !<BR>> !<BR>> !<BR>> interface Loopback0<BR>> ip address X.X.X.X <A onclick="return top.js.OpenExtLink(window,event,this)" href="http://255.255.255.255/" target=_blank>255.255.255.255</A><BR>> h323-gateway voip bind srcaddr X.X.X.X<BR>> !<BR>> !<BR>> ip classless<BR>> ip route <A onclick="return top.js.OpenExtLink(window,event,this)" href="http://0.0.0.0/" target=_blank>0.0.0.0</A> <A onclick="return top.js.OpenExtLink(window,event,this)" href="http://0.0.0.0/" target=_blank>0.0.0.0</A> X.X.X.X 254<BR>> !<BR>> !<BR>> control-plane<BR>> !<BR>> !<BR>> !<BR>> voice-port 0/1/0 <BR>> signal loopStart<BR>> !<BR>> voice-port 0/1/1<BR>> signal loopStart<BR>> !<BR>> dial-peer voice 10 pots<BR>> destination-pattern 50001<BR>> port
0/1/0<BR>> !<BR>> dial-peer voice 20 pots <BR>> destination-pattern 50002<BR>> port 0/1/1<BR>> !<BR>> dial-peer voice 1 voip<BR>> preference 1<BR>> destination-pattern 1...<BR>> session target ipv4:X.X.X.X<BR>> dtmf-relay h245-alphanumeric <BR>> codec g729r8 bytes 40<BR>> ip qos dscp cs3 media<BR>> ip qos dscp cs3 signaling<BR>> !<BR>> dial-peer voice 4 voip<BR>> preference 2<BR>> destination-pattern 1...<BR>> session target ipv4:X.X.X.X <BR>> dtmf-relay h245-alphanumeric<BR>> codec g729r8 bytes 40<BR>> ip qos dscp cs3 media<BR>> ip qos dscp cs3 signaling<BR>> !<BR>> <BR>> <BR>> <BR>> ---------------------------------<BR>> Be a better Globetrotter. Get better travel answers from someone who knows. <BR>> Yahoo! Answers - Check it out.</div></DIV></BLOCKQUOTE> <div> </div> <DIV style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=1> </DIV> <div>Don't let
your dream ride pass you by. <A onclick="return top.js.OpenExtLink(window,event,this)" href="http://us.rd.yahoo.com/evt=51200/*http:/autos.yahoo.com/index.html;_ylc=X3oDMTFibjNlcHF0BF9TAzk3MTA3MDc2BHNlYwNtYWlsdGFncwRzbGsDYXV0b3MtZHJlYW1jYXI-" target=_blank>Make it a reality</A> with Yahoo! Autos. </div> <div><BR>_______________________________________________<BR>cisco-voip mailing list<BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net" target=_blank>cisco-voip@puck.nether.net </A><BR><A onclick="return top.js.OpenExtLink(window,event,this)" href="https://puck.nether.net/mailman/listinfo/cisco-voip" target=_blank>https://puck.nether.net/mailman/listinfo/cisco-voip</A></div></DIV> <div> </div></DIV> <DIV style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=2> </DIV> <div><SPAN>_______________________________________________</SPAN><BR><SPAN>cisco-voip mailing list</SPAN><BR><SPAN><A
onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net" target=_blank>cisco-voip@puck.nether.net </A></SPAN><BR><SPAN><A onclick="return top.js.OpenExtLink(window,event,this)" href="https://puck.nether.net/mailman/listinfo/cisco-voip" target=_blank>https://puck.nether.net/mailman/listinfo/cisco-voip </A></SPAN></div></BLOCKQUOTE></DIV></DIV> <div> </div></SPAN></DIV></DIV></DIV> <DIV> <div> <HR SIZE=1> <div></div> <div><STRONG>Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message
and deleting it from your computer. Thank you. </STRONG></div> <div></div></DIV></BLOCKQUOTE></DIV><BR></BLOCKQUOTE>_______________________________________________<BR>cisco-voip mailing list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip</BLOCKQUOTE><BR><p> 
<hr size=1>Looking for a deal? <a href="http://us.rd.yahoo.com/evt=47094/*http://farechase.yahoo.com/;_ylc=X3oDMTFicDJoNDllBF9TAzk3NDA3NTg5BHBvcwMxMwRzZWMDZ3JvdXBzBHNsawNlbWFpbC1uY20-">Find great prices on flights and hotels</a> with Yahoo! FareChase.