<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7651.59">
<TITLE>Re: [cisco-voip] CUBE or IP IP GW with MTP</TITLE>
</HEAD>
<BODY>
<DIV id=idOWAReplyText85654 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>Ok, </FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>Whats best practice</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>So If I have a Service Provider SIP trunk
terminating lets say 100 DID's. From my IP to IP GW I'm pointing these DID's to
various destinations. For example 40 DID's going to CallManager, 30 DID's going
to a remote CallManager Express and the remaining 30 DID's pointing to something
else like some of that new Microsoft Stuff (mediation server and
OCS)</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>If I'm doing something like this do I setup
all MTP / Transcoding on the IPtoIP GW and register it against Telephony
Services or should I use each remote system to have their own resources to
use?</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>Or</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>Do I pass all calls through one system ie
(CallManger) and create a dialplan from there that brings all these systems
together?</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>Hope this makes sense?</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>Ryan</FONT></DIV>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2></FONT> </DIV></DIV>
<DIV id=idSignature6781 dir=ltr>
<DIV><FONT face=Arial color=#000000 size=2>
<DIV class=Section1><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial">
<DIV class=MsoNormal style="MARGIN: 0in 0in 0pt"><SPAN
style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial"><A
title=http://www.unislumin.com/
href="http://www.unislumin.com"></A></SPAN></SPAN> </DIV></DIV></FONT></DIV></DIV>
<DIV dir=ltr><BR>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> tele
[mailto:tele@plexialab.it]<BR><B>Sent:</B> Fri 10/26/2007 2:18 AM<BR><B>To:</B>
Ryan O'Connell<BR><B>Cc:</B> cisco-voip@puck.nether.net<BR><B>Subject:</B> Re:
[cisco-voip] CUBE or IP IP GW with MTP<BR></FONT><BR></DIV>
<DIV>
<P><FONT size=2>Hi,<BR><BR>Ryan yes you need turn on
"telephony-services".<BR>You can also use an external DSP farm for the MTP or
transcoding.<BR><BR><A
href="http://www.cisco.com/en/US/products/ps6706/products_feature_guide09186a008076161a.html">http://www.cisco.com/en/US/products/ps6706/products_feature_guide09186a008076161a.html</A><BR><BR><BR><BR>:tele<BR><BR>On
Thu, 2007-10-25 at 22:34 -0400, Ryan O'Connell wrote:<BR>> Hello
all,<BR>><BR>> <BR>><BR>> Quick question, on IOS routers you
can use DSP resources as MTP. I<BR>> understand and implemented this many
times in the past using SCCP<BR>> commands that point back to CallManager or
CallManager Express. I'm<BR>> just wondering in the case of CUBE or IP-IP GW
used as a SIP trunk to<BR>> the Service provider, and we are not using
CallManager or CallManager<BR>> Express can I still use the DSP's for MTP's,
Transcoding? In my case<BR>> I'm specifically looking for MTP's cause I need
it for FAST Start<BR>> H.323 calls.<BR>><BR>> <BR>><BR>>
According to the attached Document there is such thing as a "HARDWARE<BR>>
based MTP" but the bullet stats that it uses SCCP<BR>><BR>>
1. MTPs ( and Transcoders ) can be controlled by
Communications<BR>> Manager or the Cisco Unified Border Element (via
SCCP)<BR>><BR>> So do they mean that I have to turn on
"TELEPHONY-SERVICES" just to<BR>> make use of these MTP or am I missing
something<BR>><BR>> <BR>><BR>>
Ryan<BR>><BR>> <BR>><BR>> <BR>><BR>><BR>><BR>>
______________________________________________________________________<BR>>
Privileged/Confidential Information may be contained in this message.<BR>>
Disclosure to any person other than the named recipient is<BR>>
unauthorized. If you are not the intended recipient, please delete<BR>>
all copies of this information and kindly notify the sender by reply<BR>>
email. Opinions, conclusions and other information in this message<BR>>
that do not relate to the official business of UNIS LUMIN Inc. shall<BR>> be
understood as neither given nor endorsed by it. UNIS LUMIN Inc.<BR>>
and any of its subsidiaries reserve the right to monitor all e-mail<BR>>
communications through its networks. Thank you.<BR>><BR>><BR>>
______________________________________________________________________<BR>><BR>>
Disclaimer: This e-mail communication and any attachments may contain<BR>>
confidential and privileged information and is for use by the<BR>> designated
addressee(s) named above only. If you are not the intended<BR>> addressee,
you are hereby notified that you have received this<BR>> communication in
error and that any use or reproduction of this email<BR>> or its contents is
strictly prohibited and may be unlawful. If you<BR>> have received this
communication in error, please notify us<BR>> immediately by replying to this
message and deleting it from your<BR>> computer. Thank you.<BR>><BR>>
_______________________________________________<BR>> cisco-voip mailing
list<BR>> cisco-voip@puck.nether.net<BR>> <A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR><BR></FONT></P></DIV>
</BODY>
</HTML>