<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3199" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=Arial size=2>Take a look at Adtran...it's a device that can take
in analog ports and output to PRI...or so I've been told.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>But remember, from fast, good and cheap, you can
pick two....but not all three. ;)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The <A
href="https://www.adtran.com/adtranpx/Rooms/DisplayPages/LayoutInitial_webrQS%20_Q29udGFpbmVyPWNvbS53ZWJyaWRnZS5lbnRpdHkuRW50aXR5W09JRFs0Mjk5MzM2RDAxMUVDMDQyQTA1RjFEMEM3QjNFMkFEOV1d">Atlas
</A>product line is what might help you out.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>----- Original Message ----- </FONT>
<DIV><FONT face=Arial size=2>From: "Curt Shaffer" <</FONT><A
href="mailto:cshaffer@gmail.com"><FONT face=Arial
size=2>cshaffer@gmail.com</FONT></A><FONT face=Arial size=2>></FONT></DIV>
<DIV><FONT face=Arial size=2>To: <</FONT><A
href="mailto:cisco-voip@puck.nether.net"><FONT face=Arial
size=2>cisco-voip@puck.nether.net</FONT></A><FONT face=Arial
size=2>></FONT></DIV>
<DIV><FONT face=Arial size=2>Sent: Tuesday, November 13, 2007 5:28
PM</FONT></DIV>
<DIV><FONT face=Arial size=2>Subject: [cisco-voip] POTS rather than
Pri</FONT></DIV></DIV>
<DIV><FONT face=Arial><BR><FONT size=2></FONT></FONT></DIV><FONT face=Arial
size=2>>I have a project to install a CME system for a customer. This was
turned<BR>> over to me from another, unrelated, installer. It appears that
the router<BR>> (2811) was ordered with a PRI interface and 4 FXO ports. The
problem is that<BR>> the customer is actually running on 14 POTS lines. To
make matters worse,<BR>> their current old phone system is dying more and
more every day. <BR>> <BR>> I'm basically trying to see how I can salvage
time and get them migrated on<BR>> schedule. A change to PRI is going to take
a while so while that is probably<BR>> the best option, I am stuck with the
current system failing. Does anyone<BR>> have any recommendations of a device
(ATA or similar) that I can use to take<BR>> in 14 POTS lines and bring it
into the CME box? Time, low cost and<BR>> reliability are obvious
requirements here. I will probably start the ball<BR>> rolling on the PRI
order but I am sure that is not going to be ready for at<BR>> least 60
days.<BR>> <BR>> <BR>> Thanks for the input<BR>> <BR>>
Curt<BR>> <BR>> <BR>>
_______________________________________________<BR>> cisco-voip mailing
list<BR>> </FONT><A href="mailto:cisco-voip@puck.nether.net"><FONT face=Arial
size=2>cisco-voip@puck.nether.net</FONT></A><BR><FONT face=Arial size=2>>
</FONT><A href="https://puck.nether.net/mailman/listinfo/cisco-voip"><FONT
face=Arial
size=2>https://puck.nether.net/mailman/listinfo/cisco-voip</FONT></A><BR><FONT
face=Arial size=2>></FONT></BODY></HTML>