i had already tried this command in controller mode, but it is not for E1 it is only for T1 interfaces.<br><br>
<div><span class="gmail_quote">On 11/14/07, <b class="gmail_sendername">Justin Steinberg</b> <<a href="mailto:jsteinberg@gmail.com">jsteinberg@gmail.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">add the 'cablelength short' command underneath the controller for the<br>pbx integration.<br><br>On Nov 14, 2007 9:09 AM, zohaib shabir <
<a href="mailto:zohaibshabir@gmail.com">zohaibshabir@gmail.com</a>> wrote:<br>> Dear All,<br>><br>> I am having strange problem in connecting the Avaya PBX G3 Si V8 with Cisco<br>> router, what is happening is that the E1 link b/w these two is going up and
<br>> down. what i see the output from the sh controller command is that the<br>> increase in Path code Violations and Line Code violations. I have changed my<br>> physical cabling and also the cable from the tag block to the PBX, but the
<br>> situation is unchanged. i am able to call either way from PBX to FXS phone<br>> or from FXS phone to PBX but the call gets disconnected within 10 seconds<br>> due to increase in Path Code Violations and Line Code Violations.
<br>><br>> I am also attaching the running config , sh ver and sh diag output for any<br>> possible help.<br>><br>> -<br>> Regards,<br>> Zohaib Shabir<br>> Network Engineer(Voice)<br>> DWP Group, TECH Division Karachi
<br>> Ph:+92-302-8232689<br>> _______________________________________________<br>> cisco-voip mailing list<br>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip">
https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>><br></blockquote></div><br><br clear="all"><br>-- <br>Regards,<br>Zohaib Shabir<br>Network Engineer(Voice)<br>DWP Group, TECH Division Karachi<br>Ph:+92-302-8232689