<div>CUCMBE 6.0(1)</div>
<div>2811 12.4(13r)T</div>
<div> </div>
<div>I can't seem to get mobile voice access working. I followed the directions to a T but I still can't get the IVR portion to answer. I configured the H323 gateway as shown below. I also added the dial-peers as shown in the config guide. I still get a fast busy when I call the external access DID from a cell phone. Q931 shows the call coming into the gateway but it gives me an unallocated/unassigned number error. Is there a trick to get this vxml application to trigger? Do I have to load something into flash in order for it to work? All configs on the CallManager side are complete. Thanks!
</div>
<div><font size="1"><strong></strong></font> </div>
<div><font size="1"><strong>Step 3</strong></font></div>
<div>
<p align="left"><font face="DOJOO C+ Times,Times" size="2"><strong>Load</strong> the VXML application from the Cisco Unified Communications Manager server (Publisher). </font></p>
<p align="left">Sample configuration for IOS Version 12.3 (13) and later: </p><b><font size="1">
<p align="left">•</p></font></b><font face="DOJOO C+ Times,Times" size="2">application service CCM </font><font face="DOJOO C+ Times,Times" size="2"></font><b><font size="1">
<p>•</p></font></b><font face="DOJOO C+ Times,Times" size="2">http://<Unified CM cluster Publisher IP Addr>:8080/ccmivr/pages/IVRMainpage.vxml</font></div>