<html>
<head>
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
FONT-SIZE: 10pt;
FONT-FAMILY:Tahoma
}
</style>
</head>
<body class='hmmessage'>
<TABLE style="BORDER-TOP-WIDTH: 0px; PADDING-RIGHT: 0px; PADDING-LEFT: 0px; BORDER-LEFT-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; PADDING-BOTTOM: 0px; PADDING-TOP: 0px; BORDER-RIGHT-WIDTH: 0px; spacing: 0">
<TBODY>
<TR>
<TD>
<H3 style="COLOR: #666"> </H3><BR>I don`t seem to obtain a straight answer from any data guys- I`m voice <BR><BR>How do I make vlans go to different scoops and different DHCP servers- data, voice <BR><BR>question 1 <BR><BR>I have a switch which is connected to phones, on the port 1, I have configured a native data vlan and voice vlan- native 2, voice vlan 3-, port 2 have data native vlan 2 , voice vlan 3 . port 3 naive, voice vlan 4 <BR>Connected to this switch is the CCM using DHCP - test set up.On the DHCP I have set up 3 scoop VLAN 2 10.2.1.1 and VLAN 3 10.3.1.1. vlan 4 10.4.1.1 The first question is how can I make the vlan 2 go to scoop configured with 10.2.1.1 and vlan 3 to go to scoop with IP address 10.3.1.1 and VLAN 4 go to scoop vlan 4 10.4.1.1. <BR><BR><BR><BR>The next question if the DHCP for data is else where , the switch has a IP helper address pointing to it so to turn the request into a routing request ? however as the site is running SRST I want to configure the SRST router with DHCP which will be used for the voice phones only all other devices will use the remote DHCP- how do I make the data device go to the remote DHCP and voice to use the SRST and choose the correct scoop <BR><BR>is it something like <BR><BR>interface vlan 2 <BR>ip helper xxxxx <BR><BR>interface vlan 2 <BR><BR>10.2.1.1. <BR><BR>interface vlan 3 <BR><BR>10.3.1.1 <BR><BR>interface vlan 4 <BR><BR>10.4.1.1 <BR><BR><BR>many thanks<BR></TD></TR></TBODY></TABLE></body>
</html>