Phoneload Readme File:
=================================================

Please follow the procedure below to upgrade 79XX/XX IP phones from manufacturing load to a phone load supported by CME.

1. Download the phone load files from CCO. The latest load files will be included in cme-124-15T.zip file or the cme-basic-4.1.0.0.tar file. 

For example, if the system is running CME 4.1, you would use cme-basic-4.1.0.0.tar

All cme-basic-x.x.x.x.tar files are posted on the CCO site below:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-iostsp

2. Extract phone load files to your router flash. Copy the cme-basic-x.x.x.x.tar to a TFTP server, 
and enter archive command to extract contents of tar file to router Flash:

Router# archive tar /xtract tftp://ip-address/filename flash: 

For example, if you the TFTP server address is 192.168.1.1, you would enter:
archive tar /xtract tftp://192.168.1.1/cme-basic-4.1.0.0.tar flash:

If you download the cme-124-15T.zip file, then the zip file contains individual tar files for each phone type that you will be using.


3. Share the phone load files by issuing the command 'tftp-server flash:Pxxxxxx' for each file on the flash.  
For CME 4.0, your running configuration will look like this:

tftp-server flash:P00308000400.bin
tftp-server flash:P00308000400.loads
tftp-server flash:P00308000400.sb2
tftp-server flash:P00308000400.sbn

Examples:
TFTP Server statements needed for 7906 7911 phones
=====================================================

archive tar /xtract tftp://x.x.x.x/cmterm-7911_7906-sccp.8-2-2SR1.tar flash:

tftp-server flash:apps11.8-2-2ES1.sbn
tftp-server flash:cnu11.8-2-2ES1.sbn
tftp-server flash:cvm11sccp.8-2-2ES1.sbn
tftp-server flash:dsp11.8-2-2ES1.sbn
tftp-server flash:jar11sccp.8-2-2ES1.sbn
tftp-server flash:SCCP11.8-2-2SR1S.loads
tftp-server flash:term06.default.loads
tftp-server flash:term11.default.loads

telephony-service
load 7906 SCCP11.8-2-2SR1S
load 7911 SCCP11.8-2-2SR1S

===================================================
TFTP Server statements needed for 7941 7961 phones

archive tar /xtract tftp://x.x.x.x/cmterm-7941_7961-sccp.8-2-2SR1.tar flash:


tftp-server flash:apps41.8-2-2ES1.sbn
tftp-server flash:cnu41.8-2-2ES1.sbn
tftp-server flash:cvm41sccp.8-2-2ES1.sbn
tftp-server flash:dsp41.8-2-2ES1.sbn
tftp-server flash:jar41sccp.8-2-2ES1.sbn
tftp-server flash:SCCP41.8-2-2SR1S.loads
tftp-server flash:term41.default.loads
tftp-server flash:term61.default.loads

telephony-service
load 7941 SCCP41.8-2-2SR1S
load 7961 SCCP41.8-2-2SR1S

=====================================================
TFTP Server statements for 7970 7971 phones

archive tar /xtract tftp://x.x.x.x/cmterm-7970_7971-sccp.8-2-2SR1.tar flash:

tftp-server flash:apps70.8-2-2ES1.sbn
tftp-server flash:cnu70.8-2-2ES1.sbn
tftp-server flash:cvm70sccp.8-2-2ES1.sbn
tftp-server flash:dsp70.8-2-2ES1.sbn
tftp-server flash:jar70sccp.8-2-2ES1.sbn
tftp-server flash:SCCP70.8-2-2SR1S.loads
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads

telephony-service
load 7970 SCCP70.8-2-2SR1S
load 7971 SCCP70.8-2-2SR1S

=====================================================
TFTP Server statements for 7940 7960 phones

archive tar /xtract tftp://x.x.x.x/P00308000400.tar flash:

tftp-server flash:P00308000400.bin
tftp-server flash:P00308000400.loads
tftp-server flash:P00308000400.sb2
tftp-server flash:P00308000400.sbn

telephony-service
load 7960-7940 P00308000400

====================================================
TFTP Server statements for 7931 phone

tftp-server flash:apps31.8-2-2ES1.sbn
tftp-server flash:cnu31.8-2-2ES1.sbn
tftp-server flash:cvm31sccp.8-2-2ES1.sbn
tftp-server flash:dsp31.8-2-2ES1.sbn
tftp-server flash:jar31sccp.8-2-2ES1.sbn
tftp-server flash:SCCP31.8-2-2SR1S.loads
tftp-server flash:term31.default.loads

telephony-service
load 7931 SCCP31.8-2-2SR1S


4. Specify the load command for each phone type (refer to examples above) - afterwards, configure the command "create-cnf" underneath telephony service.

For CME 4.1, your running configuration will look like this: 

telephony-service
 load 7960-7940 P00308000400
 max-ephones 24
 max-dn 24
 ip source-address 192.168.1.1 port 2000
 max-conferences 12 gain -6
 transfer-system full-consult
 create cnf-files version-stamp Jan 01 2002 00:00:00
 
 NOTE: For each load command, it is followed by the phoneload name WITHOUT the ".load" statement 
 
5. Reset the phones to upgrade to the new phone firmware files. 
Please note that the phone may reboot multiple times and can take up to 10 minutes for each phone to upgrade. 
Do not unplug or reset the phones during this process until the phone registers to CME with a Directory Number displayed.



NOTES:
===========================================
For a list of the correct "load" commands and phoneloads for each phone type, refer to the following link.

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a00807aae21.html