<div>Bad becomes worst. </div>
<div>Tried downgrading MCU version and now it won't boot properly. Seems like the upload was corrupt.</div>
<div>Can't access the GUI menu of the MCU. Since mcucfg can't be loaded, i do not know the default snmp read and write string, upgrade doesn't push through with the snmp string.</div>
<div> </div>
<div>Any ideas?</div>
<div> </div>
<div>On the console, getting:</div>
<div>==============================================================================<br>The last MCU config burn operation wrong: WARNING<br>Retrieved old volume params with %75 confidence:<br>Volume Parameters: FAT type: FAT16, sectors per cluster 255
<br> 255 FAT copies, 0 clusters, 65535 sectors per FAT<br> Sectors reserved -1, hidden -1, FAT sectors 16711425<br> Root dir entries -1, sysId (null) , serial number ffffffff<br> Label:" " ...<br>
Disk with 512 sectors of 512 bytes will be formatted with:<br>Volume Parameters: FAT type: FAT12, sectors per cluster 1<br> 2 FAT copies, 500 clusters, 2 sectors per FAT<br> Sectors reserved 1, hidden 0, FAT sectors 4<br>
Root dir entries 112, sysId VXDOS12 , serial number ffffffff<br> Label:" " ...<br></div>
<div> </div>
<div><br><br> </div>
<div class="gmail_quote">On Nov 26, 2007 1:21 PM, Jefflin Choi <<a href="mailto:jefflin.choi@gmail.com">jefflin.choi@gmail.com</a>> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>Hi All, <br><br>I've upgraded the MCU 3545 to version <a href="http://5.1.0.24/" target="_blank">5.1.0.24</a> and was successful. However the sccp registration of the mcu on the ccm 5.1.2 failed, Unregistered. From the logs of the MCU, it says not compatible with MP v2.
<br><br>I am also trying to upgrade the emp version <a href="http://5.1.0.27/" target="_blank">5.1.0.27</a> where according to the cco it is compatible with mcu <a href="http://5.1.0.24/" target="_blank">5.1.0.24</a> however upgrade fails with reason ..."the SW target type different from HW target type"
</div>
<div><br>Could someone point me to the correct direction? <br>What software does the mcu need to run the <a href="http://5.1.0.24/" target="_blank">5.1.0.24</a> and register via sccp on ccm 5.1?</div>
<div> </div>
<div>Thanks!</div></blockquote></div><br>