<div>CUCMBE 6.0(1)</div>
<div>MGCP 2811 IOS 12.4 (PRI)</div>
<div> </div>
<div>I'm trying to enable Enterprise Feature Access with Two-Stage Dialing on a newly installed CUCMBE 6.0(1). The instructions tell me to configure mobility under the call routing section of the admin pages. I added in the Enterrpise Feature Access Directory number and partition for the DID I'm using but I don't know what to use for the handoff number field. It tells me to plug in a number for wi-fi, GSM or CDMA?? It won't let me leave the field blank. So, I put a dummy number in there just for kicks. When I call the DID access number I get a recording from telco saying that the number is not a working number. I know for a fact that the number works because if I assign it to an IP phone it will ring the phone. The reason I am using Enterprise Feature Access with Two-Stage Dialing instead of Mobile voice access is because I don't want to have to switch my gateway to H323. I assume I'm missing a step in the configuration. I have all of the services in enterprise parameters turned on. Any help would be appreciated.
</div>
<div> </div>
<div>Thanks,</div>
<div>Jason</div>