<div>successfully recovered it using UploadUtility 1.3.6.</div>
<div> </div>
<div>I've successfully upgrade the MCU to <a href="http://5.1.0.24">5.1.0.24</a> and EMP to <a href="http://5.1.0.27">5.1.0.27</a> and all is working fine.</div>
<div> </div>
<div>Thanks.</div>
<div><br><br> </div>
<div><span class="gmail_quote">On 11/26/07, <b class="gmail_sendername">Jonathan Charles</b> <<a href="mailto:jonvoip@gmail.com">jonvoip@gmail.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Now it is time for TAC...<br><br><br><br>Jonathan<br><br>On Nov 26, 2007 2:33 AM, Jefflin Choi <<a href="mailto:jefflin.choi@gmail.com">
jefflin.choi@gmail.com</a>> wrote:<br>> Bad becomes worst.<br>> Tried downgrading MCU version and now it won't boot properly. Seems like the<br>> upload was corrupt.<br>> Can't access the GUI menu of the MCU. Since mcucfg can't be loaded, i do not
<br>> know the default snmp read and write string, upgrade doesn't push through<br>> with the snmp string.<br>><br>> Any ideas?<br>><br>> On the console, getting:<br>> ==============================================================================
<br>> The last MCU config burn operation wrong: WARNING<br>> Retrieved old volume params with %75 confidence:<br>> Volume Parameters: FAT type: FAT16, sectors per cluster 255<br>> 255 FAT copies, 0 clusters, 65535 sectors per FAT
<br>> Sectors reserved -1, hidden -1, FAT sectors 16711425<br>> Root dir entries -1, sysId (null) , serial number ffffffff<br>> Label:" " ...<br>> Disk with 512 sectors of 512 bytes will be formatted with:
<br>> Volume Parameters: FAT type: FAT12, sectors per cluster 1<br>> 2 FAT copies, 500 clusters, 2 sectors per FAT<br>> Sectors reserved 1, hidden 0, FAT sectors 4<br>> Root dir entries 112, sysId VXDOS12 , serial number ffffffff
<br>> Label:" " ...<br>><br>><br>><br>><br>><br>><br>> On Nov 26, 2007 1:21 PM, Jefflin Choi <<a href="mailto:jefflin.choi@gmail.com">jefflin.choi@gmail.com</a>> wrote:<br>
><br>> ><br>> > Hi All,<br>> ><br>> > I've upgraded the MCU 3545 to version <a href="http://5.1.0.24">5.1.0.24</a> and was successful. However<br>> the sccp registration of the mcu on the ccm
5.1.2 failed, Unregistered. From<br>> the logs of the MCU, it says not compatible with MP v2.<br>> ><br>> > I am also trying to upgrade the emp version <a href="http://5.1.0.27">5.1.0.27</a> where according to
<br>> the cco it is compatible with mcu <a href="http://5.1.0.24">5.1.0.24</a> however upgrade fails with reason<br>> ..."the SW target type different from HW target type"<br>> ><br>> > Could someone point me to the correct direction?
<br>> > What software does the mcu need to run the <a href="http://5.1.0.24">5.1.0.24</a> and register via sccp<br>> on ccm 5.1?<br>> ><br>> > Thanks!<br>><br>><br>> _______________________________________________
<br>> cisco-voip mailing list<br>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip
</a><br>><br></blockquote></div><br>